Q: What angles can this fence be set to?
It has fixed detents at 0°, 18°, 22.5°, 25.7°, 30°, 36°, 45° and 60°, and locks at any angle in between with a gyratory handle.
05P5485 - Veritas Shooting Board Fence
This fence kit lets you construct a shooting board that doesn’t limit you to one angle – the fence is adjustable to let you easily shoot miters of various angles. A spring-loaded button registers in fixed detents at 0°, 18°, 22.5°, 25.7°, 30°, 36°, 45° and 60° to let you quickly adjust the fence to shoot square angles as well as miters for frames with ten, eight, seven, six, five, four or three sides. For angles in between, the fence locks in place with a gyratory handle.
The fence is cast from a strong zinc-aluminum alloy, with steel and brass fittings. It is easily installed on a user-made shooting board in a right- or left-hand configuration, using the included mounting hardware. A slot in the fence face accepts an adjustable user-made wooden sacrificial extension, which helps prevent grain blow-out by supporting stock from behind.
Made in Canada.
It has fixed detents at 0°, 18°, 22.5°, 25.7°, 30°, 36°, 45° and 60°, and locks at any angle in between with a gyratory handle.
No, this is the fence kit only; it's installed on a shooting board you build yourself.
Yes, the included mounting hardware lets you install it in a right- or left-hand configuration.
The angle detents support frames with ten, eight, seven, six, five, four or three sides.
| Materials | Zinc-aluminum alloy; steel and brass fittings |
| Dimensions | Adjustable 0° to 60°; detents for 10/8/7/6/5/4/3-sided frames |
| Package Quantity | 1 item |
| Color/Finish | Black and brass |
| Country of Origin | Canada |
| Warranty | Lee Valley Satisfaction Guarantee |
Options:
Variations:
Veritas Shooting Board Fence
This fence kit lets you construct a shooting board that doesn’t limit you to one angle – the fence is adjustable to let you easily shoot miters of various angles. A spring-loaded button registers in fixed detents at 0°, 18°, 22.5°, 25.7°, 30°, 36°, 45° and 60° to let you quickly adjust the fence to shoot square angles as well as miters for frames with ten, eight, seven, six, five, four or three sides. For angles in between, the fence locks in place with a gyratory handle.
The fence is cast from a strong zinc-aluminum alloy, with steel and brass fittings. It is easily installed on a user-made shooting board in a right- or left-hand configuration, using the included mounting hardware. A slot in the fence face accepts an adjustable user-made wooden sacrificial extension, which helps prevent grain blow-out by supporting stock from behind.
Made in Canada.
