Accessibility Statement

Description

This optional shim accessory set increases the flexibility of the Veritas Domino Joinery Table for small shop and production users alike. Combined with the standard 6mm shims that are included with the table, the 2mm, 4mm and 8mm shims in the accessory kit permit a wide variety of vertical offsets for the center of the mortise in the workpiece. Without shims installed, the minimum offset is 5mm.

The shims are installed in pairs under the Festool Domino DF 500 and are used to create offsets from 6mm to 13mm when installed in either the 1mm slots or along the edges of the recess.

Related Products

Using the Domino joiner at a 45° angle to cut holes for Domino tenon for a miter joint between two boards
Using the Domino joiner horizontally to cut holes for Domino tenons for an end butt joint in deck boards
Using the Domino joiner horizontally with spacer to cut holes for Domino tenons for a joint in deck boards
Dial at two different settings to adjust the mortise width for different sized tenons and to allow for wood movement when using floating tenons
Festool Domino Joiner DF 500 Q Plus
Festool Domino Joiner DF 500 Q Set

Festool Domino DF 500 Q Joiner

From:

Choose an option to view item availability.

{{price.Quantity}}+ {{price.FormattedPrice}}
Sold Out

{{itemExceptionMessage}}

{{productExceptionMessage}}

Product Added To WishList

Product cannot be added at this time

Choose an option to add an item to your cart.

Online - {{ stockStatus }}

{{ storeName }} - {{ locationStockStatus }}

A Domino joiner used on a Veritas Domino joinery table to cut butt-joint mortises in end grain
A Domino joiner used on a Veritas Domino joinery table to cut butt-joint mortises in side grain
The offset registration gauge being used to position the right-angle fence
A Domino joiner used on a Veritas Domino joinery table to cut miter-joint mortises in end grain
A Domino joiner mounted on a Veritas Domino joinery table, shown with two fences and two hold-downs
The underside of a Domino joinery table, showing 4” tall base made of Baltic birch plywood
Steel mounting studs threaded into a Domino joiner to mount it on a Veritas Domino joinery table
Securing a Domino joiner in position on a Veritas Domino joinery table
Installing shims in the table slots of a Veritas Domino joinery table to create a vertical offset
Two frames with butt and miter joints cut using a Domino joiner on a Veritas Domino joinery table
05J1701 - Veritas Domino Joinery Table

Veritas Domino Joinery Table

From:

Choose an option to view item availability.

{{price.Quantity}}+ {{price.FormattedPrice}}
Sold Out

{{itemExceptionMessage}}

{{productExceptionMessage}}

Product Added To WishList

Product cannot be added at this time

Choose an option to add an item to your cart.

Online - {{ stockStatus }}

{{ storeName }} - {{ locationStockStatus }}

Milling a mortise for a domino tenon in a door
Festool Domino DF 700 EQ Plus Joining System
Festool Domino DF 700 EQ Joining System Set
Placing the joiner on a board prior to making a cut

Festool Domino DF 700 EQ Joining System

From:

Choose an option to view item availability.

{{price.Quantity}}+ {{price.FormattedPrice}}
Sold Out

{{itemExceptionMessage}}

{{productExceptionMessage}}

Product Added To WishList

Product cannot be added at this time

Choose an option to add an item to your cart.

Online - {{ stockStatus }}

{{ storeName }} - {{ locationStockStatus }}

A Veritas small drill-press table and fence mounted on a drill press
05J6810 - Veritas Small Drill-Press Table & Fence
Attaching the included mounting plate used to install the Veritas small drill-press table
Securing the table top to the mounting plate
Setting the removable wooden insert into the table top to support through-drilling
Using built-in levelling screws to set the wooden insert flush with the drill-press table surface
A workpiece secured with a hold-down clamp set in one of the 3/4" dog holes in the drill-press table
Sub-fences on the Veritas small drill-press table opened to allow off-edge drilling
A Veritas 1 1/2" flip stop mounted in the T-track on the drill-press table’s fence
05J6810 - Veritas Small Drill-Press Table & Fence

Veritas Small Drill-Press Table & Fence

From:

Choose an option to view item availability.

{{price.Quantity}}+ {{price.FormattedPrice}}
Sold Out

{{itemExceptionMessage}}

{{productExceptionMessage}}

Product Added To WishList

Product cannot be added at this time

Choose an option to add an item to your cart.

Online - {{ stockStatus }}

{{ storeName }} - {{ locationStockStatus }}

Surcharge