03J7783 - Rikon Jaw Set for Pens, Treens & Small Projects
We're often asked which jaws we recommend for various turning applications. For those who primarily turn pens, treen and other small pieces, we've selected three Rikon jaw sets that cover a range of options for smaller-scale projects. The selection includes mini step jaws, 35mm standard jaws and two-piece pen jaws, offered at a saving compared to purchasing them separately at our regular prices.
The mini step jaws (71-202) have two stepped dovetail profiles for expanding into recesses of different diameters, with minimum expanding diameters of approximately 1" and 1 1/2". Serrated inner faces also allow the jaws to contract around the work, with a minimum diameter of approximately 0.4".
The 35mm steel standard jaws (71-210) are a good choice for work smaller than the practical range of Rikon’s general-purpose 2" standard jaws. They have dovetailed outer faces that can expand into a matching recess, and a flat inner bore that can be used to contract around work supported by the tailstock.
The two-piece pen jaws hold standard pen blanks securely on the lathe for drilling, end-squaring and other common pen-turning operations. Their long opposing faces center square or round blanks while leaving two quadrants open for clearance. Drilling on the lathe keeps the blank and drill aligned without requiring a separate pen vise or drill-press set-up.
All are made of machined and polished steel. Mounting screws not included.
Also compatible with standard Nova chucks, except Nova Quick Change models. Covered by a 10-year warranty.
Options:
Variations:
Rikon Jaw Set for Pens, Treen & Small Projects
We're often asked which jaws we recommend for various turning applications. For those who primarily turn pens, treen and other small pieces, we've selected three Rikon jaw sets that cover a range of options for smaller-scale projects. The selection includes mini step jaws, 35mm standard jaws and two-piece pen jaws, offered at a saving compared to purchasing them separately at our regular prices.
The mini step jaws (71-202) have two stepped dovetail profiles for expanding into recesses of different diameters, with minimum expanding diameters of approximately 1" and 1 1/2". Serrated inner faces also allow the jaws to contract around the work, with a minimum diameter of approximately 0.4".
The 35mm steel standard jaws (71-210) are a good choice for work smaller than the practical range of Rikon’s general-purpose 2" standard jaws. They have dovetailed outer faces that can expand into a matching recess, and a flat inner bore that can be used to contract around work supported by the tailstock.
The two-piece pen jaws hold standard pen blanks securely on the lathe for drilling, end-squaring and other common pen-turning operations. Their long opposing faces center square or round blanks while leaving two quadrants open for clearance. Drilling on the lathe keeps the blank and drill aligned without requiring a separate pen vise or drill-press set-up.
All are made of machined and polished steel. Mounting screws not included.
Also compatible with standard Nova chucks, except Nova Quick Change models. Covered by a 10-year warranty.
