99W6210 - Set of 2 Kutzall Shaping Discs
This item is not available for this region.
Until December 19, 2021, we’re offering these multi-purpose shaping wheels as a set (one sanding disc and one carving disc) at a saving of $25 compared to buying them separately at our regular prices (a $174 value).
Used with an angle grinder, these sanding and carving discs are covered with hundreds of extremely sharp carbide teeth that remove stock quickly and stay sharp through extended use.
Though aggressive, the teeth leave a surprisingly smooth surface and resist loading due to their consistent height and spacing. They are well suited for shaping large carvings and chair seats, and in other applications for which you would normally use a large gouge.
The sanding disc has a fairly flat profile with a narrow rim, useful for cutting, and a broad face for shaping convex surfaces. The dish wheel, shaped like a half donut (or, more formally, a half torus) is good for everything else, especially inside curves and concave areas; its versatility makes it a good choice for beginners.
Each is 4 1/2" in diameter with a 7/8" bore. Maximum 15,000 rpm.
Made in USA.
Options:
Variations:
Set of 2 Kutzall Shaping Discs
Until December 19, 2021, we’re offering these multi-purpose shaping wheels as a set (one sanding disc and one carving disc) at a saving of $25 compared to buying them separately at our regular prices (a $174 value).
Used with an angle grinder, these sanding and carving discs are covered with hundreds of extremely sharp carbide teeth that remove stock quickly and stay sharp through extended use.
Though aggressive, the teeth leave a surprisingly smooth surface and resist loading due to their consistent height and spacing. They are well suited for shaping large carvings and chair seats, and in other applications for which you would normally use a large gouge.
The sanding disc has a fairly flat profile with a narrow rim, useful for cutting, and a broad face for shaping convex surfaces. The dish wheel, shaped like a half donut (or, more formally, a half torus) is good for everything else, especially inside curves and concave areas; its versatility makes it a good choice for beginners.
Each is 4 1/2" in diameter with a 7/8" bore. Maximum 15,000 rpm.
Made in USA.
