Q: What rotary tools does this fit?
Anything with a standard 3/4-12 threaded collar, which covers most rotary tools, including full-size Dremel models.
05J6501 - Veritas Plunge Base for Rotary Tools
With this base, you can convert almost any rotary tool into a miniature plunge router for fine detail work, allowing precise depth control for hardware and inlay recesses, or even freehand relief carving. Low-slung grips and a 4" × 3" footprint make it easy to position on narrow surfaces and close to edges.
A cutaway in one side lets you see the exact position of the bit. Depth of cut is controlled with a stop post with a micro-adjust screw; you can plunge as needed, or lock in the depth using a lever for continuous cuts.
Grooves near the base let you hold and guide the tool using just your fingertips while keeping your palms close to the work for excellent control. Made largely from aluminum with stainless-steel rods and knobs, it fits onto the 3/4-12 threaded collar found on most rotary tools (including most full-size Dremel tools). Patented.
This plunge base can also be purchased as part of a set with a fence and center kit, precision adjuster and 12" fence rods.
Made in Canada.
Anything with a standard 3/4-12 threaded collar, which covers most rotary tools, including full-size Dremel models.
A stop post with a micro-adjust screw lets you dial in the depth precisely, and a lever locks it in place for repeated, continuous cuts.
Yes, the Veritas plunge base for rotary tools gives precise depth control well suited to inlay and hardware recesses, as well as freehand relief carving.
A cutaway on one side of the base keeps the bit's position visible, so you can guide the cut accurately.
Not on its own, but it's also available as part of a set that adds a fence and center kit, a precision adjuster and 12" fence rods.
| Materials | Aluminum; stainless steel |
| Dimensions | 4" × 3" footprint |
| Compatibility | Fits 3/4-12 threaded collar found on most rotary tools, including full-size Dremel tools |
| Includes | Plunge base |
| Package Quantity | 1 item or set |
| Country of Origin | Canada |
| Warranty | Lee Valley Satisfaction Guarantee |
Options:
Variations:
Veritas Plunge Base for Rotary Tools
With this base, you can convert almost any rotary tool into a miniature plunge router for fine detail work, allowing precise depth control for hardware and inlay recesses, or even freehand relief carving. Low-slung grips and a 4" × 3" footprint make it easy to position on narrow surfaces and close to edges.
A cutaway in one side lets you see the exact position of the bit. Depth of cut is controlled with a stop post with a micro-adjust screw; you can plunge as needed, or lock in the depth using a lever for continuous cuts.
Grooves near the base let you hold and guide the tool using just your fingertips while keeping your palms close to the work for excellent control. Made largely from aluminum with stainless-steel rods and knobs, it fits onto the 3/4-12 threaded collar found on most rotary tools (including most full-size Dremel tools). Patented.
This plunge base can also be purchased as part of a set with a fence and center kit, precision adjuster and 12" fence rods.
Made in Canada.
Choose an option to view item availability.
Choose an option to view item availability.
Choose an option to view item availability.
Choose an option to view item availability.
