Skip to contentAccessibility Statement
ITEM ADDED TO YOUR CART ()
logologoCart
Cart
A 1 1/4" slab-flattening router bit placed on a large wooden slab that has been partially flattened
Using a 1 1/4" slab-flattening router bit to cut a rabbet in a wooden board on a router table
Using a router with a router sled and a 1 1/4" slab-flattening bit to flatten a wooden slab
Amana 1 1/4" Slab-Flattening Router Bit
Amana 1 1/4" Slab-Flattening Router Bit
A 1 1/4" slab-flattening router bit placed on a large wooden slab that has been partially flattened
Using a 1 1/4" slab-flattening router bit to cut a rabbet in a wooden board on a router table
Using a router with a router sled and a 1 1/4" slab-flattening bit to flatten a wooden slab
Amana 1 1/4" Slab-Flattening Router Bit
Amana 1 1/4" Slab-Flattening Router Bit

Amana 1 1/4" Slab-Flattening Router Bit

Quantity:

For smaller-scale slab-flattening operations, as well as for rabbeting and slotting, this 1 1/4" diameter, 1/2" shank bit can be used with routers, router sleds and CNC systems.


The double-fluted bit has two cutters that are made of carbide, so they retain their sharp edges through long use. Each cutter is bolt-mounted and sharpened on all four edges, so once it eventually shows signs of wear, it can be loosened and rotated to expose a fresh edge and is easily removed for replacement (spare cutters offered separately).


Effective on wood, wood composites (including MDF) as well as epoxy, acrylic, UHMW and other polymers, the bit permits controlled cutting to a maximum plunge depth of 1/4".

A 1 1/4" slab-flattening router bit placed on a large wooden slab that has been partially flattened

Options:

Variations:

  • 86H0607 - Amana 1 1/4" Slab-Flattening Router Bit
    1 - $224.00

Amana 1 1/4" Slab-Flattening Router Bit

For smaller-scale slab-flattening operations, as well as for rabbeting and slotting, this 1 1/4" diameter, 1/2" shank bit can be used with routers, router sleds and CNC systems.


The double-fluted bit has two cutters that are made of carbide, so they retain their sharp edges through long use. Each cutter is bolt-mounted and sharpened on all four edges, so once it eventually shows signs of wear, it can be loosened and rotated to expose a fresh edge and is easily removed for replacement (spare cutters offered separately).


Effective on wood, wood composites (including MDF) as well as epoxy, acrylic, UHMW and other polymers, the bit permits controlled cutting to a maximum plunge depth of 1/4".

Related Products

Router on carrier travels back and forth across the width of the slab
15K0701 - Router Sled Hardware Kit
A wood slab is flattened using a router and the assembled router sled
Assembled glides fastened to the router carrier
Router is mounted to the assembled carrier
A trunnion installed on metal tubing
Assembled glides installed on router carrier
Illustration showing a wood slab positioned on the assembled router sled for flattening. The router sled and slab are supported on a wooden frame.
Router Sled Hardware Kit
Product Information
A 1 1/8 inch diameter spoilboard CNC bit next to a rabbeted board
A 1 1/2 inch diameter spoilboard CNC bit next to a rabbeted board
86H0601 - 1 1/8" Spoilboard CNC Router Bit
86H0604 - 1 1/2" Spoilboard CNC Router Bit
Amana Spoilboard CNC Router Bits
Used with a router sled, a router with a flattening bit is passed across a wood slab to flatten it
16J2574 - 1 1/2" Flattening Bit, 1/2” Shank
18J2516 - 1" Flattening Bit, 8mm Shank
18J2524 - 1 1/2" Flattening Bit, 8mm Shank
Used with a router sled, a router with a flattening bit flattens a rough wood slab to an even, workable piece
Flattening Router Bits