Quantity:
These are top-quality, high-performance bandsaw blades. For more than 25 years, the Wood Slicer resaw blades were an exclusive product line developed and distributed by Highland Woodworking. Now available from Lee Valley, they are sharper, thinner, stronger and quieter than standard resaw blades.
The carbon-manganese spring steel bodies have twice the tensile strength of conventional bandsaw blades, and are flash butt upset-welded to make a joint indistinguishable in mechanical properties from the rest of the blade. The teeth are cut using exclusive sharpening technology, set, and precisely hardened to Rc65-67. The tooth pattern is an alternating 3 tpi to 4 tpi variable tooth pitch design that reduces resonance and makes for a blade that cuts significantly more quietly and tracks better.
The blade is 0.022" thick and has a minimal set to produce a 0.03125" kerf – about half that of similar blades. The blade back is also rounded and polished to eliminate a potential source of fatigue cracks and minimize wear on thrust bearings. These properties make the blades ideal for resawing dry wood while minimizing waste, giving smoother, straighter, faster cuts. The blades are not recommended for green wood or curved cuts.
Options:
Length
Variations:
1/2" Wood Slicer Resaw Bandsaw Blades
These are top-quality, high-performance bandsaw blades. For more than 25 years, the Wood Slicer resaw blades were an exclusive product line developed and distributed by Highland Woodworking. Now available from Lee Valley, they are sharper, thinner, stronger and quieter than standard resaw blades.
The carbon-manganese spring steel bodies have twice the tensile strength of conventional bandsaw blades, and are flash butt upset-welded to make a joint indistinguishable in mechanical properties from the rest of the blade. The teeth are cut using exclusive sharpening technology, set, and precisely hardened to Rc65-67. The tooth pattern is an alternating 3 tpi to 4 tpi variable tooth pitch design that reduces resonance and makes for a blade that cuts significantly more quietly and tracks better.
The blade is 0.022" thick and has a minimal set to produce a 0.03125" kerf – about half that of similar blades. The blade back is also rounded and polished to eliminate a potential source of fatigue cracks and minimize wear on thrust bearings. These properties make the blades ideal for resawing dry wood while minimizing waste, giving smoother, straighter, faster cuts. The blades are not recommended for green wood or curved cuts.
