99W9743 - Kreg Ionic Drive Rebel Cordless Pocket-Hole Joiner Kit
This item is not available for this region.
Kreg’s line of Ionic Drive cordless tools runs on long-life lithium-ion batteries that deliver a combination of ample power and run time. The high-efficiency 20V brushless motors can power through difficult tasks without binding or stalling. Circuitry in the battery senses load on the motor and adjusts torque, delivering additional power in demanding situations and helping conserve battery life under lighter loads.
This cordless pocket-hole joiner combines portability and precision, letting you work conveniently and efficiently. By integrating a powerful drill and jig into one tool, it provides the speed and control needed for clean, repeatable joints, whether you're working in your garage or shop, or on a job site.
Fence and drilling depth adjustments are tool-free, making it easy to position pocket holes accurately on panels, rails and face frames in stock from 1/2" to 1 1/2" thick. Pocket-hole depth is easily micro-adjusted to compensate for small deviations from the preset thicknesses. A narrow rail guide lets you locate the tool precisely on narrow workpieces, and retractable spring-loaded support feet provide stability when the workpiece is offset from the reference surface. The HSS drill bit has a 3/16" diameter by 1/2" long pilot and a 3/8" diameter counterbore. An included snap-in shroud connects to a 1 1/4" vacuum hose.
One 4.0 Ah battery and a standard charger are supplied with the joiner. Also compatible with Kreg’s 2.0 Ah battery (sold separately). Both the battery and charger have electronics that monitor temperature and voltage to ensure efficient charging, while protecting the battery from overheating or overcharging. Additional batteries are available.
You set the fence and drilling depth without tools, clamp the workpiece, then drill through the guide holes with the included HSS bit. The rebel cordless pocket-hole joiner kit's adaptive torque circuitry adjusts power to the wood as you go.
A pocket-hole jig drills an angled hole so a screw can join two pieces of wood face-to-face or edge-to-edge without visible fasteners on the outer surface.
No, one 4.0 Ah lithium-ion battery and a charger are included, and the kit is also compatible with a 2.0 Ah battery, available separately.
It handles stock from 1/2" to 1 1/2" thick, with the fence and depth adjusting without tools for each thickness.
Yes, the narrow rail guide positions the jig on workpieces too slim for the standard fence to register against.
Yes, a snap-in shroud on the jig connects to a 1 1/4" vacuum hose, so chips pull away from the joint as you drill.
| Materials | High-speed steel (HSS) drill bit |
| Compatibility | Compatible with a Kreg 2.0 Ah battery |
| Motor | 20V brushless motor |
| Power Source | 20V lithium-ion |
| Includes | Rebel cordless pocket-hole joiner; 4.0 Ah lithium-ion battery; charger; HSS drill bit; snap-in dust shroud |
| Package Quantity | 1 kit |
| Warranty | Lee Valley Satisfaction Guarantee |
Options:
Variations:
Rebel Cordless Pocket-Hole Joiner Kit
Kreg’s line of Ionic Drive cordless tools runs on long-life lithium-ion batteries that deliver a combination of ample power and run time. The high-efficiency 20V brushless motors can power through difficult tasks without binding or stalling. Circuitry in the battery senses load on the motor and adjusts torque, delivering additional power in demanding situations and helping conserve battery life under lighter loads.
This cordless pocket-hole joiner combines portability and precision, letting you work conveniently and efficiently. By integrating a powerful drill and jig into one tool, it provides the speed and control needed for clean, repeatable joints, whether you're working in your garage or shop, or on a job site.
Fence and drilling depth adjustments are tool-free, making it easy to position pocket holes accurately on panels, rails and face frames in stock from 1/2" to 1 1/2" thick. Pocket-hole depth is easily micro-adjusted to compensate for small deviations from the preset thicknesses. A narrow rail guide lets you locate the tool precisely on narrow workpieces, and retractable spring-loaded support feet provide stability when the workpiece is offset from the reference surface. The HSS drill bit has a 3/16" diameter by 1/2" long pilot and a 3/8" diameter counterbore. An included snap-in shroud connects to a 1 1/4" vacuum hose.
One 4.0 Ah battery and a standard charger are supplied with the joiner. Also compatible with Kreg’s 2.0 Ah battery (sold separately). Both the battery and charger have electronics that monitor temperature and voltage to ensure efficient charging, while protecting the battery from overheating or overcharging. Additional batteries are available.
Choose an option to view item availability.
Choose an option to view item availability.
