Grex Brad Nailer

Among the many nailers on the market, this one stands out. It’s not just built to last but is thoughtfully designed with features that make the tool more comfortable and convenient to use.

The 1850GB nailer installs 18 gauge brads, which have greater pullout resistance and shear strength than headless pins, so they're suitable for projects that require sturdy construction to resist loading. The driver pin is slimmer in cross section than most nailers, so it leaves a hole only about the size of the brad head.

You can select between two firing modes: in sequential mode, the tool fires once for every squeeze of the trigger, and in continuous mode, the tool automatically drives a brad each time you touch the tip to the work while holding down the trigger. Its trigger automatically disengages when there are just a few fasteners left, eliminating dry-firing so you don't make dents in your work or cause needless wear to the tool. An adjustment wheel lets you fine tune nailing depth independent of air pressure. The nailer accepts 1/2" to 2" brads and operates at 70 to 120 psi. For dense material, pressure can be set up to 145 psi.

The easy-to-fill side-loading magazine has a long window, so you can see at a glance when it's time to reload, while its stepped profile lets you tilt the tool for better access into corners. The swivelling hose coupling minimizes tangles, and a rear-mounted vent directs the exhaust away from the user. To prevent marring delicate or contoured surfaces, it has a replaceable soft tip.

A belt hook lets you carry the nailer hands-free on either side of the body, helpful when working on a ladder. With a durable all-metal construction, it has a cast aluminum housing, an extruded magazine, and precisely machined pistons and valves. Tight manufacturing tolerances ensure smooth, jam-free operation and minimize wear.

Comes in a fitted plastic carry case. A professional-grade nailer backed by a 1-year warranty.