Q: How much does this sander weigh?
At just 0.97kg (2 lb 2 oz) and 4" tall, it's built for overhead and vertical sanding tasks and working into tight spots.
08K4012 - Mirka DEOS 3" × 5" Abranet Kit
This kit pairs a Mirka DEOS electric sander with a selection of Abranet Grip mesh abrasive sheets to cover a wide range of sanding applications.
Comfortable to operate for long sessions, the ergonomically designed sander is a powerful yet maneuverable tool. Its 3mm orbital pattern yields fine finishes, and its 3" × 5" platen permits precise sanding right up to an edge, with bevelled sides to avoid contact with adjacent surfaces. At 4" tall and weighing just 0.97kg (2 lb 2 oz), it is well suited for overhead or vertical tasks and for working into tight spots.
Powered by a 14' grounded cord, its 250W brushless motor performs comparably to a 360W conventional motor. It has a low noise rating of 69 dB as well as low vibration output (2.6m/s²) and pairs with the myMirka app to monitor long-term vibration exposure.
Effectively dust-free in use, it has a rear port for connection to a 1" diameter vacuum hose, and a pattern of holes in the platen distributes suction across the entire sanding sheet.
In variable-speed mode, the upper control paddle lets you adjust speed on the fly without interrupting your work; pressing the paddle increases the rpms, and a lighter squeeze slows the motor. In fixed-speed mode, you can lock in any of five settings within its 5000 to 10,000 rpm range, with the paddle serving as an on/off switch to stop the tool within seconds. Backed by a 2-year warranty.
The kit comes with 150 mesh abrasive sheets (50 each of 80x, 120x and 150x), which use aluminum oxide grit bonded to a tough polyamide mesh, allowing sanding dust to be drawn through the entire sheet to resist loading and maximize dust recovery.
At just 0.97kg (2 lb 2 oz) and 4" tall, it's built for overhead and vertical sanding tasks and working into tight spots.
It includes 150 mesh abrasive sheets, 50 each in 80x, 120x and 150x grits.
In fixed-speed mode it locks into any of five settings from 5,000 to 10,000 rpm, and the paddle adjusts speed on the fly in variable mode.
No, the sander connects through a 1" diameter vacuum hose port to a separate dust collector such as the Mirka 1230; this kit supplies the sander and abrasive sheets only.
The Mirka DEOS 3 × 5 Abranet Kit suits precise edge work and tight spots, thanks to its compact platen and fine 3mm orbit.
| Dimensions | 4" tall; 3" × 5" platen |
| Weight | 0.97kg (2 lb 2 oz) |
| Package Quantity | 1 kit |
| Compatibility | Accepts Mirka 3" × 5" Abranet Grip sheets. |
| Compatibility Dimensions | Fits 1" diameter vacuum hose |
| Includes | Electric sander; abrasive sheets |
| Power Source | Corded electric, 14' cord |
| Motor | 250W brushless (comparable to 360W conventional); 5,000–10,000 rpm |
| Safety | 69 dB noise rating; 2.6 m/s² vibration output |
| Warranty | 2-year manufacturer warranty; Lee Valley Satisfaction Guarantee |
Options:
Variations:
Mirka DEOS 3" × 5" Abranet Kit
This kit pairs a Mirka DEOS electric sander with a selection of Abranet Grip mesh abrasive sheets to cover a wide range of sanding applications.
Comfortable to operate for long sessions, the ergonomically designed sander is a powerful yet maneuverable tool. Its 3mm orbital pattern yields fine finishes, and its 3" × 5" platen permits precise sanding right up to an edge, with bevelled sides to avoid contact with adjacent surfaces. At 4" tall and weighing just 0.97kg (2 lb 2 oz), it is well suited for overhead or vertical tasks and for working into tight spots.
Powered by a 14' grounded cord, its 250W brushless motor performs comparably to a 360W conventional motor. It has a low noise rating of 69 dB as well as low vibration output (2.6m/s²) and pairs with the myMirka app to monitor long-term vibration exposure.
Effectively dust-free in use, it has a rear port for connection to a 1" diameter vacuum hose, and a pattern of holes in the platen distributes suction across the entire sanding sheet.
In variable-speed mode, the upper control paddle lets you adjust speed on the fly without interrupting your work; pressing the paddle increases the rpms, and a lighter squeeze slows the motor. In fixed-speed mode, you can lock in any of five settings within its 5000 to 10,000 rpm range, with the paddle serving as an on/off switch to stop the tool within seconds. Backed by a 2-year warranty.
The kit comes with 150 mesh abrasive sheets (50 each of 80x, 120x and 150x), which use aluminum oxide grit bonded to a tough polyamide mesh, allowing sanding dust to be drawn through the entire sheet to resist loading and maximize dust recovery.
Choose an option to view item availability.
Choose an option to view item availability.
Choose an option to view item availability.
Choose an option to view item availability.
