Skip to contentAccessibility Statement

Canada Post disruption - We use multiple carriers, so your orders will not be impacted.

ITEM ADDED TO YOUR CART ()
logologoCart
Cart
Using a Bessey Beyceps assembly jack to raise a cabinet carcass into position
Using a Bessey Beyceps assembly jack to raise a large household appliance
Using a Bessey Beyceps assembly jack to position a heavy door during installation
Using a Bessey Beyceps assembly jack to position a large window frame during installation
17F0380 - Bessey Beyceps 400 lb Assembly Jack
17F0380 - Bessey Beyceps 400 lb Assembly Jack

17F0380 - Bessey Beyceps 400 lb Assembly Jack

Bessey Beyceps 400 lb Assembly Jack

This item is not available for this region.

Strong yet capable of precise adjustment, this jack quickly raises a cabinet, window frame or other assembly to the exact height needed for installation, then holds it steady as you drive fasteners. Capable of lifting up to 400 lb, it is constructed of heavy-gauge steel and fiberglass-reinforced nylon, with a sturdy 7/8" × 5/16" main shaft. Two or more jacks can be used in tandem to keep loads level and stable without need of a helper.

A full squeeze raises the lift plate about 7mm (just over 1/4"); a partial squeeze lets you gradually adjust the position in finer increments, to a maximum height of 9 1/4". If you overshoot the target, a controlled-release lever lets you lower the item in 1/8" decrements. A second lever allows a full release, letting the lift bars slide back to the start position.

The lift plate is 5mm (about 3/16") thick steel, slightly thinner at the leading edge so it’s easier to slip under an object.

A useful and substantial tool.

Using a Bessey Beyceps assembly jack to raise a cabinet carcass into position

Options:

Variations:

    Bessey Beyceps 400 lb Assembly Jack

    Strong yet capable of precise adjustment, this jack quickly raises a cabinet, window frame or other assembly to the exact height needed for installation, then holds it steady as you drive fasteners. Capable of lifting up to 400 lb, it is constructed of heavy-gauge steel and fiberglass-reinforced nylon, with a sturdy 7/8" × 5/16" main shaft. Two or more jacks can be used in tandem to keep loads level and stable without need of a helper.

    A full squeeze raises the lift plate about 7mm (just over 1/4"); a partial squeeze lets you gradually adjust the position in finer increments, to a maximum height of 9 1/4". If you overshoot the target, a controlled-release lever lets you lower the item in 1/8" decrements. A second lever allows a full release, letting the lift bars slide back to the start position.

    The lift plate is 5mm (about 3/16") thick steel, slightly thinner at the leading edge so it’s easier to slip under an object.

    A useful and substantial tool.

    Related Products

    Using two micro-trigger clamps with a wooden block to create a stop block for use with a drill press
    Using a micro-trigger clamp to clamp a rectangular wooden box
    17F0102 - Micro-Trigger Clamp
    17F0102 - Micro-Trigger Clamp
    Micro-Trigger Clamp
    Product Information
    Two 360° Trigger Clamps hold a glued shelf on a shelving unit
    Rotating the head of a 360° Trigger Clamp with two hands
    The 360 degree trigger clamps are clamping a piece of wood to a drill press
    360° Trigger Clamps
    360° Trigger Clamps
    17F0104 - 6"" Trigger Clamp
    17F0105 - 12"" Trigger Clamp
    17F0106 - 18"" Trigger Clamp
    17F0107 - 24"" Trigger Clamp
    17F0108 - 36"" Trigger Clamp
    360° Medium-Duty Trigger Clamps