Risers for Veritas Worksurface

A Phillips screwdriver and a 7/16" socket are all that's required; installation reuses the T-bolts and track extrusion already on the worksurface.

Each pair stands 3 1/2" tall, enough to clear dog-hole accessories with posts up to 4 7/8" long that would otherwise bottom out against the bench.

No, risers for the Veritas Worksurface are sized specifically for that platform's track and T-bolt system and won't fit a standard workbench or other worksurfaces.

Remove the rubber feet and the nuts and washers holding the track extrusion, lift the track free of the worksurface, then slide the long T-bolts provided into the track and lower it back into place through the riser before reinstalling the washers and nuts.