Accessibility Statement

Tools

05N0430 - Set of 3 Shop Rules – 12", 18" & 24"

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Set of 3 Veritas Imperial Shop Rules

$79.50

05N0440 - Set of 4 Shop Rules – 12", 18", 24" & 39"

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Set of 4 Veritas Imperial Shop Rules

$129.00

Using a pencil and a shop rule to mark hinge locations on an inside cabinet wall

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Veritas 12" Shop Rule

$22.50

Standing an 18" shop rule on end to lay out slide locations on a drawer

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Veritas 18" Shop Rule

$32.50

Standing a shop rule on end to lay out hinge locations on an inside wall of a cabinet

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Veritas 24" Shop Rule

$39.50

Using a pencil and a 39" shop rule to mark a plywood panel

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Veritas 39" Shop Rule

$59.50

05N0431 - Set of 3 Shop Rules – 12"/300mm, 18"/450mm & 24"/600mm

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Set of 3 Veritas Imperial/Metric Shop ...

$79.50

05N0441 - Set of 4 Shop Rules – 12"/300mm, 18"/450mm, 24"/600mm & 39"/1m

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Set of 4 Veritas Imperial/Metric Shop ...

$129.00

Using a pencil and a 12”/300mm shop rule to mark hinge locations on an inside cabinet wall

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Veritas 12"/300mm Shop Rule

$22.50

Registering the end of an 18"/450mm shop rule against an inside wall of a cabinet carcass

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Veritas 18"/450mm Shop Rule

$32.50

Using a pencil and a 24"/600mm shop rule to mark a cut line on a sheet of plywood

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Veritas 24"/600mm Shop Rule

$39.50

Using a pencil and a 39"/1 metre shop rule to mark a plywood panel

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Veritas 39"/1m Shop Rule

$59.50

05N0432 - Set of 3 Shop Rules – 300mm, 450mm & 600mm

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Set of 3 Veritas Metric Shop Rules

$79.50

05N0442 - Set of 4 Shop Rules – 300mm, 450mm, 600mm & 1m

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Set of 4 Veritas Metric Shop Rules

$129.00

Using a pencil and a shop rule to mark hinge locations on an inside cabinet wall

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Veritas 300mm Shop Rule

$22.50

Standing a 450mm shop rule on end to lay out slide locations on a drawer

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Veritas 450mm Shop Rule

$32.50

Standing a shop rule on end to lay out hinge locations on an inside wall of a cabinet

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Veritas 600mm Shop Rule

$39.50

Using a pencil and a 1 metre shop rule to mark a plywood panel

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Veritas 1m Shop Rule

$59.50

05N3501 - Precision Square, Imperial

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Veritas Precision Square

$49.50

05N3505 - Veritas Large Precision Square

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Veritas Large Precision Square

$89.00

Marking wood with a pencil along the edge of a Veritas edge rule set flush with the end of the stock

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Veritas Metric Edge Rules

From: $11.50

Marking wood with a pencil set against the edge of a Veritas edge rule saddling a workpiece corner

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Veritas Imperial Edge Rules

From: $11.50

Holding a drill bit against the drill stop gauge while tightening the drill stop hex key

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Veritas Drill Stop Gauge

$9.50

Setting the depth of cut for a router bit on a router table using the layout block

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Veritas Imperial Layout Block

From: $9.95

05N5831 - Veritas Metric Layout Block, ea.

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Veritas Metric Layout Block

From: $9.95

05N3201 - Veritas Sliding Square, Imperial

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Veritas Sliding Squares

$49.50

Registering a 35mm Pocket Layout Square against the edge of a workpiece while marking a cut line

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Veritas 35mm Pocket Layout Square

$12.50

Registering a 1 1/2"" Pocket Layout Square against the edge of a workpiece while marking a cut line

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Veritas 1 1/2" Pocket Layout Square

$12.50

A 1 1/2" Pocket Layout Square used to mark a cut on a workpiece, with the 3 1/2" square behind it

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Set of 3 Veritas Imperial Pocket Layou...

$49.90

A 35mm Pocket Layout Square used to mark a cut on a workpiece, with the 85mm square behind it

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Set of 3 Veritas Metric Pocket Layout ...

$49.90

05K9512 - Veritas P724 Plumb Bob

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Veritas P724 Plumb Bob

$34.50

05N2901 - Veritas Bar Gauge

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Veritas Bar Gauge

$89.00

05N3101 - Bar Gauge Heads

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Veritas Bar Gauge Heads

$18.90

05N5807 - Veritas 19-Piece Set-Up Blocks (Primary Set + 2 Expansion Sets)

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Veritas Set-Up Blocks

From: $26.50

05N6603 - Bevel Setter w/Metric Rule

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Veritas Bevel Setter

$44.50

Veritas Aluminum Straightedges

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Veritas Aluminum Straightedges

From: $36.50

Veritas Steel Straightedges

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Veritas Steel Straightedges

From: $59.50

05N3601 - Veritas Carpenter's Gauge

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Veritas Carpenter's Gauge

$32.50

05N7805 - Set of 6 French Curves

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Veritas French Curves

(Set of 6)

$59.00

05N5401 - Veritas Square Fence

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Veritas Square Fence

$29.90

05N6801 - Veritas Ruler Stop

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Veritas Ruler Stop

$19.90

05N6408 - 1" Offset Wheel Gauge

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Veritas Offset Wheel Gauges

From: $4.10