Though essential for safe ripping on table saws, featherboards can be a bother to set up and adjust.
These featherboards are quick to position and secure. Adjustment is controlled with two large T-knobs, one for fixing position relative to the blade, and the other for adjusting tension against the work. The 3/4" thick main frame has 5-1/2" of lateral travel and is suitable for use left or right of the blade.
The single featherboard comes with 5/8" and 3/4" table bars to fit most table slots, as well as bolts to fit 1/4" wide T-slot track fence systems.
The dual featherboard system includes a pair of independent featherboards (each with 5/8" and 3/4" table bars and bolts for 1/4" T-slot track), plus a 1-1/2" thick spacer with hardware that allows the featherboards to be stacked for tandem use with thicker stock or materials fed along their end or edge (such as with vertical panel raising or rabbeting).