Veritas® Bevel-Up Jointer Plane

A. Veritas® Bevel-Up Jointer Plane
The Veritas low-angle jointer is the latest and largest member of our bevel-up bench plane family. At 22" x 2-7/8" and weighing 7-1/2 lb, it is the answer for jointing edges and flattening large panels.

The bevel-up blade configuration results in a plane that is versatile and straightforward to use. The 12° bed angle, coupled with the 25° blade bevel, creates an effective cutting angle of 37°. Simply increasing the blade bevel results in higher cutting angles for improved performance in more difficult-grained woods. Includes a 2-1/4" wide lapped blade, 3/16" (0.187") thick, in either A2 or O1 tool steel. Blade is the same size as our other bevel-up planes, allowing blades of various bevel angles to be interchanged between planes. See the price lines below for further blade options.

An adjustable throat plate allows a wide range of mouth adjustment. Our unique stop-screw retains mouth settings while preventing blade damage when removing and replacing blades.

B. Veritas® Bevel-Up Jointer Fence
The Veritas low-angle jointer fence enables you to shoot consistent and accurate square or bevelled edges with your Veritas bevel-up jointer. The 11" long anodized aluminum fence can be attached to either side of the plane with the brass thumbscrews provided; a set screw can be adjusted to square the fence to the sole.

As supplied, the 2" tall guiding face can be used to plane edges perfectly square to the face of your workpiece. It can also be used to shoot angles less than 90° when a bevelled wooden guide is attached to the inside face of the fence.

Made in Canada.