Accessibility Statement


Used for through joints where the nut may be exposed, this nut has a closed end and is knocked into the pre-drilled hole.

The teeth hold the nut in place and prevent it from turning as the bolt is tightened.

The nut is die-cast from a zinc alloy. Pre-drill size will vary from 8.3mm to 8.7mm, depending on material thickness and density.


Measurements for Capped Insert Nut

L: 15.5mm

L1: 13mm

D1: 17mm

D2: 10.8mm

D3: 8.4mm

Related Products