05N4669 – Set of 2 Veritas Metric Edge Rules & End Stop
Until October 1, 2026, we’re offering this set of two Veritas metric edge rules and a large edge rule end stop at a saving of 15% compared to buying the items separately.
This set includes two edge rules in 450mm and 600mm lengths as well as a large rule end stop that is compatible with both.
The great advantage of this style of rule is that it saddles the edge of a workpiece, making it easy to hold accurately in position when measuring and marking layout lines.
Ours have an acute interior angle to ensure that they seat well, even over saw whiskers, and bevelled edges with etched graduations to minimize parallax errors. This design also simplifies transfer of perpendicular lines from face to edge, and is particularly convenient when holding and marking off dowel rod stock.
The wide leg on the L-shaped cross-section is for face work, while the shorter leg is for narrow stock and edge work. The rules have face depths of 1" and 7/16".
You can also use the rules on a flat surface – and, since the shape makes them much easier to pick up than a flat rule, you may find yourself reaching for them as your go-to rules. Made from aluminum with a black anodized finish.
The edge rule end stop locks in place using a knurled stainless-steel screw. The geometry of the complementary extrusion shape automatically squares the stop as it is tightened in place.
All are made in Canada.
Edge rules also come in 150mm and 300mm lengths, sold separately.
Imperial rules are also available; the large end stop fits the 18" and 24" lengths.
Options:
Variations:
Set of 2 Veritas Metric Edge Rules & End Stop
Until October 1, 2026, we’re offering this set of two Veritas metric edge rules and a large edge rule end stop at a saving of 15% compared to buying the items separately.
This set includes two edge rules in 450mm and 600mm lengths as well as a large rule end stop that is compatible with both.
The great advantage of this style of rule is that it saddles the edge of a workpiece, making it easy to hold accurately in position when measuring and marking layout lines.
Ours have an acute interior angle to ensure that they seat well, even over saw whiskers, and bevelled edges with etched graduations to minimize parallax errors. This design also simplifies transfer of perpendicular lines from face to edge, and is particularly convenient when holding and marking off dowel rod stock.
The wide leg on the L-shaped cross-section is for face work, while the shorter leg is for narrow stock and edge work. The rules have face depths of 1" and 7/16".
You can also use the rules on a flat surface – and, since the shape makes them much easier to pick up than a flat rule, you may find yourself reaching for them as your go-to rules. Made from aluminum with a black anodized finish.
The edge rule end stop locks in place using a knurled stainless-steel screw. The geometry of the complementary extrusion shape automatically squares the stop as it is tightened in place.
All are made in Canada.
Edge rules also come in 150mm and 300mm lengths, sold separately.
Imperial rules are also available; the large end stop fits the 18" and 24" lengths.
