Skip to contentAccessibility Statement
ITEM ADDED TO YOUR CART ()
logologoCart
Search
Cart
Flush-cutting plugs with a Veritas Flush-Cut Saw
The Veritas Double-Edge Flush-Cutting Saw lies on a worktable next to a workpiece
Close-up of the 22 tpi Japanese tooth pattern blade of the Veritas Double-Edge Flush-Cutting Saw
05K3601 - Veritas Flush-Cut Saw, Double Edge
05K3601 - Veritas Flush-Cut Saw, Double Edge
Flush-cutting plugs with a Veritas Flush-Cut Saw
The Veritas Double-Edge Flush-Cutting Saw lies on a worktable next to a workpiece
Close-up of the 22 tpi Japanese tooth pattern blade of the Veritas Double-Edge Flush-Cutting Saw
05K3601 - Veritas Flush-Cut Saw, Double Edge
05K3601 - Veritas Flush-Cut Saw, Double Edge

Veritas Double-Edge Flush-Cutting SawMade in Canada

This item is not available for this region.

Traditionally used for the rapid trimming of plugs and dowels flush with a surface, our flush-cutting saw can be used where you want to cut off a projection without damaging the surrounding or adjoining face. This is possible because the teeth are set one way only.

The 22 tpi Japanese tooth pattern blade cuts aggressively (on the pull stroke) but does not mark the surface that it is cutting next to. The thin blade is flexible and can be pressed flush to any surface, yet is rigid enough for good control.

About 11 1/2" long with 4 3/4" of blade, in a double-edged style that cuts from either side. Works like a charm.

Made in Canada.

Flush-cutting plugs with a Veritas Flush-Cut Saw

Options:

Variations:

    Veritas Double-Edge Flush-Cutting Saw

    Traditionally used for the rapid trimming of plugs and dowels flush with a surface, our flush-cutting saw can be used where you want to cut off a projection without damaging the surrounding or adjoining face. This is possible because the teeth are set one way only.

    The 22 tpi Japanese tooth pattern blade cuts aggressively (on the pull stroke) but does not mark the surface that it is cutting next to. The thin blade is flexible and can be pressed flush to any surface, yet is rigid enough for good control.

    About 11 1/2" long with 4 3/4" of blade, in a double-edged style that cuts from either side. Works like a charm.

    Made in Canada.

    Related Products

    Using the Veritas Detail Flush-Cutting Saw on a workpiece
    05K3410 - Veritas Flush-Cut Saw, Single Edge
    Flush-cutting plugs with a Veritas Flush-Cut Saw
    Close-up of blade tip
    Close-up illustration of saw teeth
    Illustration of blade cutting a plug flush to a surface
    05K3410 - Veritas Flush-Cut Saw, Single Edge
    Veritas Detail Flush-Cutting Saw
    Product Information
    Flush-cutting a plug with the Japanese Flush-Cut Saw, Single Edge
    60T2222 - Japanese Flush-Cut Saw, Double Edge
    60T2221 - Japanese Flush-Cut Saw, Single Edge
    60T2222 - Japanese Flush-Cut Saw, Double Edge
    60T2221 - Japanese Flush-Cut Saw, Single Edge
    Japanese Single & Double-Edge Flush-Cut Saws