Skip to contentAccessibility Statement
ITEM ADDED TO YOUR CART ()
logologoCart
Search
Cart
A flip stop on a DX3 Driftmaster fence limits the cut depth on a board being rip-cut on a bandsaw
The flip stop mounted on a Laguna DX3 Driftmaster fence positioned horizontally on a bandsaw
Cutting a tenon cheek on a bandsaw, using a flip stop on a DX3 Driftmaster fence to limit the cut
Cutting a tenon cheek on a bandsaw, using a flip stop on a DX3 Driftmaster fence to limit the cut
A close-up of the flip stop on a Laguna DX3 Driftmaster fence positioned vertically on a bandsaw
86N3015 - Flip Stop for DXIII Driftmaster Fence
A flip stop on a DX3 Driftmaster fence limits the cut depth on a board being rip-cut on a bandsaw
The flip stop mounted on a Laguna DX3 Driftmaster fence positioned horizontally on a bandsaw
Cutting a tenon cheek on a bandsaw, using a flip stop on a DX3 Driftmaster fence to limit the cut
Cutting a tenon cheek on a bandsaw, using a flip stop on a DX3 Driftmaster fence to limit the cut
A close-up of the flip stop on a Laguna DX3 Driftmaster fence positioned vertically on a bandsaw
86N3015 - Flip Stop for DXIII Driftmaster Fence

Flip Stop for Laguna DXIII Driftmaster Bandsaw Fence

Quantity:

Designed for use with the DXIII Driftmaster bandsaw fence, this optional stop flips into position to limit workpiece travel.

It mounts in the T-slot on the side or top edge of the fence, so it can be used when the fence is oriented horizontally or vertically. The stop position can be referenced to the graduated scale in the fence guide, ensuring precise, consistent results when making repeat cuts, such as for tenons or other joinery. It locks in place firmly and flips out of the way when not needed.

A flip stop on a DX3 Driftmaster fence limits the cut depth on a board being rip-cut on a bandsaw

Options:

Variations:

  • 86N3015 - Flip Stop for DXIII Driftmaster Fence
    1 - $69.00

Flip Stop for Laguna DXIII Driftmaster Bandsaw Fence

Designed for use with the DXIII Driftmaster bandsaw fence, this optional stop flips into position to limit workpiece travel.

It mounts in the T-slot on the side or top edge of the fence, so it can be used when the fence is oriented horizontally or vertically. The stop position can be referenced to the graduated scale in the fence guide, ensuring precise, consistent results when making repeat cuts, such as for tenons or other joinery. It locks in place firmly and flips out of the way when not needed.

Related Products

Using the bandsaw fence in the vertical orientation to resaw a board
03J7370 - Rikon 14" Deluxe Bandsaw (10 326)
Bandsaw with top and bottom doors open to give access for blade changes and cleaning
Close-up of ball-bearing guides
Close-up of fence in vertical orientation
Close-up of handwheel with table in tilted position
Close-up of the rack-and-pinion adjustment
Rikon 14" Deluxe Bandsaw (Model 10-326)
Product Information