Quantity:
To make your Festool Domino DF 500 joiner even more versatile and easier to store, this accessory set combines a Veritas Domino Joinery Table, two shim sets and a pair of convenient wall hooks.
To simplify registering the joiner on the ends of narrow workpieces that would be difficult to position freehand, the tabletop serves as the reference face for the tool, permitting accurate, repeatable mortising. Invaluable for rail and stile construction, miter work and narrow frames, it locates precisely aligned mortises on either side of the joint.
Made of Baltic birch plywood with a laminated top and a 4" tall base, it provides a stable 31 1/2" × 23 1/4" clamping surface for the work, which is easily secured with included hold-downs. A fixed aluminum fence and a movable guide fence permit accurate positioning at 45° or 90°. The offset registration gauge lets you flip the fence for precise mortise alignment, ensuring a snug-fitting joint. User-made guide fences can also be added to hold work at other angles.
The table comes with two 6mm anodized aluminum shims to center the mortise in the edge of standard 3/4" or 18mm thick material. To expand the range of possible mortise positions by offsetting the bit in precise, repeatable increments, the master set includes two additional shim sets (normally sold separately). One set includes two each of 2mm, 4mm and 8mm shims; the larger set includes two each of 10mm, 12mm, 14mm and 16mm thicknesses. Like the original 6mm shims, they can be placed in either of the table’s two shim positions (+0mm or -1mm); having the full range of shim sizes lets you choose offsets ranging from 5mm to 21mm from the reference face of the workpiece. In double-mortise applications, the offset distance can also be referenced from a previous mortise position, using one of the shims to establish the center-to-center spacing of the mortises. The large shim set comes with a pair of 1 7/8" long studs to accommodate the extra shim thickness when mounting the DF 500 to the table.
To keep the table out of the way when not in use, the set includes a pair of Baltic birch plywood wall hooks that are sturdy enough to support the 21 lb table. Each consists of two parts: a wall plate to allow easy, secure surface mounting, and a projecting hook that registers in cut-outs in the base of the Veritas Domino Joinery Table. Minor assembly required with supplied bolts. Mounting fasteners not included.
The table is based on a Swedish design; all components of the set are made in Canada. Not compatible with the Domino DF 700.
Options:
Variations:
Veritas Domino Joinery Table Master Set
To make your Festool Domino DF 500 joiner even more versatile and easier to store, this accessory set combines a Veritas Domino Joinery Table, two shim sets and a pair of convenient wall hooks.
To simplify registering the joiner on the ends of narrow workpieces that would be difficult to position freehand, the tabletop serves as the reference face for the tool, permitting accurate, repeatable mortising. Invaluable for rail and stile construction, miter work and narrow frames, it locates precisely aligned mortises on either side of the joint.
Made of Baltic birch plywood with a laminated top and a 4" tall base, it provides a stable 31 1/2" × 23 1/4" clamping surface for the work, which is easily secured with included hold-downs. A fixed aluminum fence and a movable guide fence permit accurate positioning at 45° or 90°. The offset registration gauge lets you flip the fence for precise mortise alignment, ensuring a snug-fitting joint. User-made guide fences can also be added to hold work at other angles.
The table comes with two 6mm anodized aluminum shims to center the mortise in the edge of standard 3/4" or 18mm thick material. To expand the range of possible mortise positions by offsetting the bit in precise, repeatable increments, the master set includes two additional shim sets (normally sold separately). One set includes two each of 2mm, 4mm and 8mm shims; the larger set includes two each of 10mm, 12mm, 14mm and 16mm thicknesses. Like the original 6mm shims, they can be placed in either of the table’s two shim positions (+0mm or -1mm); having the full range of shim sizes lets you choose offsets ranging from 5mm to 21mm from the reference face of the workpiece. In double-mortise applications, the offset distance can also be referenced from a previous mortise position, using one of the shims to establish the center-to-center spacing of the mortises. The large shim set comes with a pair of 1 7/8" long studs to accommodate the extra shim thickness when mounting the DF 500 to the table.
To keep the table out of the way when not in use, the set includes a pair of Baltic birch plywood wall hooks that are sturdy enough to support the 21 lb table. Each consists of two parts: a wall plate to allow easy, secure surface mounting, and a projecting hook that registers in cut-outs in the base of the Veritas Domino Joinery Table. Minor assembly required with supplied bolts. Mounting fasteners not included.
The table is based on a Swedish design; all components of the set are made in Canada. Not compatible with the Domino DF 700.
