Q: How do stock guides prevent kickback?
These router table stock guides use one-way bearings that only roll forward, so if the bit catches the workpiece, the guides resist it being thrown back toward you.
86N4275 - JessEm Clear-Cut Router Table Stock Guides, pr.
By keeping work registered against both the fence and the router table surface, these stock guides improve safety and accuracy.
The fence-mounted rollers are set snug against the top of the stock to restrict lift, with 2 3/4" of height adjustment to accommodate different stock thicknesses. Maximum stock thickness is the approximate distance from the table top to 3/4" below the bottom of your fence’s T-slot; minimum thickness is 2 3/4" less. The 5° feed bias of the guides automatically draws the work inward, keeping it fully registered against the fence. The wear-resistant urethane tires provide good traction on the work, and one-way bearings ensure the correct feed direction, helping prevent kickbacks.
Mounts easily on any fence with a 1/4" T-track. For shop-made fences without a T-track, we offer a kit (sold separately) that includes mounting plates and fasteners.
Largely made from anodized aluminum and stainless steel, the guides greatly improve stock control on a router table.
Made in Canada.
These router table stock guides use one-way bearings that only roll forward, so if the bit catches the workpiece, the guides resist it being thrown back toward you.
They clamp to any fence with a 1/4" T-track, and an optional mounting kit is available if your fence doesn't already have one.
Maximum thickness depends on your setup, since it's measured from the tabletop to 3/4" below the fence's T-slot; the guides then adjust down 2 3/4" from that maximum.
They're available as a pair, which is what you need to control a workpiece along the length of a typical router table fence.
The 5° feed bias built into these guides continuously draws the workpiece inward against the fence as it feeds through, keeping it fully registered against the fence throughout the cut.
| Materials | Anodized aluminum; stainless steel; urethane rollers |
| Dimensions | 2 3/4" height adjustment range |
| Compatibility | Accepts optional mounting kit for fences without T-track |
| Compatibility Dimensions | Fits any fence with a 1/4" T-track |
| Includes | Stock guides |
| Package Quantity | 1 pair |
| Country of Origin | Canada |
| Warranty | Lee Valley Satisfaction Guarantee |
Options:
Variations:
JessEm Clear-Cut Router Table Stock Guides
By keeping work registered against both the fence and the router table surface, these stock guides improve safety and accuracy.
The fence-mounted rollers are set snug against the top of the stock to restrict lift, with 2 3/4" of height adjustment to accommodate different stock thicknesses. Maximum stock thickness is the approximate distance from the table top to 3/4" below the bottom of your fence’s T-slot; minimum thickness is 2 3/4" less. The 5° feed bias of the guides automatically draws the work inward, keeping it fully registered against the fence. The wear-resistant urethane tires provide good traction on the work, and one-way bearings ensure the correct feed direction, helping prevent kickbacks.
Mounts easily on any fence with a 1/4" T-track. For shop-made fences without a T-track, we offer a kit (sold separately) that includes mounting plates and fasteners.
Largely made from anodized aluminum and stainless steel, the guides greatly improve stock control on a router table.
Made in Canada.
Choose an option to view item availability.
Choose an option to view item availability.
Choose an option to view item availability.
Choose an option to view item availability.
