Q: Which routers is this lift compatible with?
It's built in five router-specific versions to fit Porter-Cable, DeWalt, Bosch 2 HP, Craftsman, Makita 1101, Milwaukee 5615 and Ridgid routers.
86N4224 - JessEm Rout-R-Lift II for Ridgid 29302 + Table Top, Fence & Stand
Model:
Option:
Choose an option to view item availability.
The Rout-R-Lift II shares the same basic design as the Mast-R-Lift II but uses more economical materials and a lighter construction.
The 3/8" × 9 1/4" × 11 3/4" phenolic insert plate has perimeter grub screws for levelling. CNC machined from solid aluminum, the router carriage travels on 5/8" guide posts and is operated by a 3/8" diameter spindle that rotates within a double-sealed bearing.
Height adjustment is provided above the table by a removable crank; each full rotation of the inset micro-bezel moves the router bit 1/16" for precise control, and the scale allows you to fine-tune adjustments to a resolution of 0.001" by interpolating between graduations. A spindle lock prevents the height setting from changing due to vibration and operates with the same crank.
To ensure easy router carriage travel, the guide rods are mounted into deep sockets that have large-diameter bases, creating a rigid structure that resists racking. The lift positions the router collet above the table surface when fully raised, giving easy access for quick, convenient bit changes. The aperture has a 3 7/8" major and 3 5/8" minor diameter to accept large-diameter bits and JessEm's insert rings.
Bearings are double sealed to resist dust infiltration for long life, and the aluminum parts are anodized for corrosion and wear resistance. Includes hex keys for adjustment/router installation, an insert ring with a 2" opening, an insert wrench and a pivot pin. Made in Canada, there are five versions of the Rout-R-Lift for different router models.
The lift is available by itself or in sets that include a table top and the JessEm Mast-R-Fence III, with or without a stand.
The table top is solid phenolic resin to provide a low-friction surface and dimensional stability, and is a generous size at 3/4" × 24" × 31 7/8" overall. Made in Canada, it has an inset extruded aluminum combination miter groove/T-track that accepts jigs with 3/4" runners and 1/4" hardware for mounting fixtures.
The 36" long by 3 9/16" high extruded anodized aluminum fence is straight, rigid and easy to position. It has two sub-fences made of hard maple, a thick phenolic base, and an upper T-track marked with a metric/Imperial scale for mounting jigs or other accessories as well as direct reading relative to the cutter, an adjustable bit guard and a 2 1/4" vacuum port. It mounts to a bracket at each end of the table that has an Imperial/metric scale for direct reading relative to the cutter. Tall clamping knobs give ready access for making adjustments. Split for effective dust collection, the maple sub-fences can also be offset with shim rods for jointing or to eliminate sniping when machining full-thickness profiles. To provide stable support during cross-grain routing, the optional JessEm Mite-R-Slide II (sold separately) travels on bearing-mounted acetal rollers that glide along the integrated T-track of the JessEm Mast-R-Fence III.
The 36" tall heavy-gauge powder-coated steel stand has cross-braces for extra tabletop support and levelling feet for uneven surfaces.
It's built in five router-specific versions to fit Porter-Cable, DeWalt, Bosch 2 HP, Craftsman, Makita 1101, Milwaukee 5615 and Ridgid routers.
Each full turn of the crank on this router lift moves the bit 1/16", with a scale that lets you interpolate down to 0.001" for fine adjustments.
Yes, raising the lift fully brings the router collet up above the table, so you can change bits from above without reaching underneath.
It comes with hex keys for adjustment and installation, a 2" insert ring, an insert wrench and a pivot pin.
The aperture measures 3 7/8" at its widest and 3 5/8" at its narrowest, sized for large-diameter bits and the included insert ring.
| Materials | CNC-machined aluminum; phenolic insert plate |
| Dimensions | 3/8" × 9 1/4" × 11 3/4" insert plate; 5/8" dia. guide posts; 3/8" dia. spindle |
| Compatibility | Fits Porter-Cable, DeWalt, Bosch 2 HP, Craftsman 1754/17540/28190, Makita 1101, Milwaukee 5615 and Ridgid routers (five router-specific versions); accepts JessEm insert rings |
| Includes | Router lift; hex keys; insert ring; insert wrench; pivot pin |
| Package Quantity | 1 item |
| Country of Origin | Canada |
| Warranty | Lee Valley Satisfaction Guarantee |
Options:
Model,Option
Variations:
JessEm Rout-R-Lift II
The Rout-R-Lift II shares the same basic design as the Mast-R-Lift II but uses more economical materials and a lighter construction.
The 3/8" × 9 1/4" × 11 3/4" phenolic insert plate has perimeter grub screws for levelling. CNC machined from solid aluminum, the router carriage travels on 5/8" guide posts and is operated by a 3/8" diameter spindle that rotates within a double-sealed bearing.
Height adjustment is provided above the table by a removable crank; each full rotation of the inset micro-bezel moves the router bit 1/16" for precise control, and the scale allows you to fine-tune adjustments to a resolution of 0.001" by interpolating between graduations. A spindle lock prevents the height setting from changing due to vibration and operates with the same crank.
To ensure easy router carriage travel, the guide rods are mounted into deep sockets that have large-diameter bases, creating a rigid structure that resists racking. The lift positions the router collet above the table surface when fully raised, giving easy access for quick, convenient bit changes. The aperture has a 3 7/8" major and 3 5/8" minor diameter to accept large-diameter bits and JessEm's insert rings.
Bearings are double sealed to resist dust infiltration for long life, and the aluminum parts are anodized for corrosion and wear resistance. Includes hex keys for adjustment/router installation, an insert ring with a 2" opening, an insert wrench and a pivot pin. Made in Canada, there are five versions of the Rout-R-Lift for different router models.
The lift is available by itself or in sets that include a table top and the JessEm Mast-R-Fence III, with or without a stand.
The table top is solid phenolic resin to provide a low-friction surface and dimensional stability, and is a generous size at 3/4" × 24" × 31 7/8" overall. Made in Canada, it has an inset extruded aluminum combination miter groove/T-track that accepts jigs with 3/4" runners and 1/4" hardware for mounting fixtures.
The 36" long by 3 9/16" high extruded anodized aluminum fence is straight, rigid and easy to position. It has two sub-fences made of hard maple, a thick phenolic base, and an upper T-track marked with a metric/Imperial scale for mounting jigs or other accessories as well as direct reading relative to the cutter, an adjustable bit guard and a 2 1/4" vacuum port. It mounts to a bracket at each end of the table that has an Imperial/metric scale for direct reading relative to the cutter. Tall clamping knobs give ready access for making adjustments. Split for effective dust collection, the maple sub-fences can also be offset with shim rods for jointing or to eliminate sniping when machining full-thickness profiles. To provide stable support during cross-grain routing, the optional JessEm Mite-R-Slide II (sold separately) travels on bearing-mounted acetal rollers that glide along the integrated T-track of the JessEm Mast-R-Fence III.
The 36" tall heavy-gauge powder-coated steel stand has cross-braces for extra tabletop support and levelling feet for uneven surfaces.
Choose an option to view item availability.
Choose an option to view item availability.
Choose an option to view item availability.
Choose an option to view item availability.
