Q: How does the angle adjustment work?
An indexing pin registers in notches around the outer edge of the steel protractor head in 1° increments, and a vernier scale permits further micro-adjustment in 1/10° increments.
95T2254 - SawStop Scale Miter Gauge
To allow quick, positive adjustment, this miter gauge uses an indexing pin that registers in a series of notches arranged around the outer edge of the steel protractor head in 1° increments. A vernier scale permits further micro-adjustment in 1/10° increments. The indexing pin can also be disengaged to permit free rotation of the protractor.
The 18 1/4" extruded aluminum fence, which extends to 31", has a T-track to mount a sacrificial sub-fence up to 3/4" thick, and an integral scale for direct reading. Adjustable expansion discs in the 3/8" × 3/4" steel slider bar provide low-friction travel and remove lateral play within the miter slot.
For accurate repeat cuts, the stop has dual flip-down arms (adjustable in 1/32" increments) that let you switch between two different cut lengths within 4" of each other without having to reset the stop position.
A hex key is included for adjustments.
Easy to set up and use, this is a practical, accurate miter gauge.
SawStop Scale Miter Gauge
Item #: 95T2254
SawStop Model #: TSA-SMG
An indexing pin registers in notches around the outer edge of the steel protractor head in 1° increments, and a vernier scale permits further micro-adjustment in 1/10° increments.
Yes, disengage the indexing pin and the protractor rotates freely to any angle.
The extruded aluminum fence is 18 1/4" long and extends to 31".
The stop has dual flip-down arms adjustable in 1/32" increments, so you can switch between two cut lengths within 4" of each other without having to reset the stop position.
Yes, the fence has a T-track that mounts a sacrificial sub-fence up to 3/4" thick.
Yes, and a hex key is included for adjustments.
| Materials | Extruded aluminum fence; steel protractor head and slider bar |
| Dimensions | 18 1/4" long fence extending to 31"; 3/8" × 3/4" slider bar |
| Includes | Miter gauge; fence; stop; hex key |
| Compatibility | Fits standard miter slots; accepts a sacrificial sub-fence up to 3/4" thick |
| Package Quantity | 1 item |
| Warranty | Lee Valley Satisfaction Guarantee |
Options:
Variations:
SawStop Scale Miter Gauge
To allow quick, positive adjustment, this miter gauge uses an indexing pin that registers in a series of notches arranged around the outer edge of the steel protractor head in 1° increments. A vernier scale permits further micro-adjustment in 1/10° increments. The indexing pin can also be disengaged to permit free rotation of the protractor.
The 18 1/4" extruded aluminum fence, which extends to 31", has a T-track to mount a sacrificial sub-fence up to 3/4" thick, and an integral scale for direct reading. Adjustable expansion discs in the 3/8" × 3/4" steel slider bar provide low-friction travel and remove lateral play within the miter slot.
For accurate repeat cuts, the stop has dual flip-down arms (adjustable in 1/32" increments) that let you switch between two different cut lengths within 4" of each other without having to reset the stop position.
A hex key is included for adjustments.
Easy to set up and use, this is a practical, accurate miter gauge.
SawStop Scale Miter Gauge
Item #: 95T2254
SawStop Model #: TSA-SMG
