Q: Will this miter gauge fit any table saw?
Not necessarily. It's built with 3/8 inch by 3/4 inch expansion discs sized for standard miter slots, so it fits most table saws, bandsaws, disc sanders and router tables with that slot size.
86N6012 - Incra V120 Miter Gauge
Known for accuracy, ease of use, and sturdy construction, an Incra miter gauge is an excellent upgrade for any table saw. Equally useful on a bandsaw, disc sander or router table, the Incra V120 is an economical but accurate miter gauge.
The protractor head has a patented indexing system for quick, positive adjustment. Adjustable expansion discs in the 3/8" × 3/4" table bars provide low-friction travel and remove lateral play within the miter slot. The head rotates 60° left or right, and has stops at 1° intervals and at ±22 1/2°. Slotted screw holes allow you to attach a shop-made fence for stock support or work with a stop-block.
Made in the USA from plated heavy-gauge steel and aluminum, the V120 gauge simplifies making precise and repeatable cross-grain cuts. The angular accuracy is 1/50 of a degree. A hex key is included for adjustments.
Not available for shipment to Québec.
Not necessarily. It's built with 3/8 inch by 3/4 inch expansion discs sized for standard miter slots, so it fits most table saws, bandsaws, disc sanders and router tables with that slot size.
Mount it in the saw's miter slot, then set the protractor head to the angle you need using the 1-degree stops or the plus-or-minus 22 1/2 degree detents for common miter cuts, locking it with the indexing system before cutting.
Besides table saws, it works on bandsaws, disc sanders and router tables, so one gauge can move between several stations in the shop.
Yes, a hex key ships with the gauge, so no extra tools are needed for the adjustments built into the head.
The Incra V120 miter gauge uses a patented indexing system accurate to 1/50 of a degree, well beyond the coarse detents on a saw's stock gauge, so repeat cuts stay consistent without re-measuring each time.
| Materials | Plated steel; aluminum |
| Compatibility | Fits standard 3/8" × 3/4" miter slots on table saws, bandsaws, disc sanders and router tables |
| Includes | Miter gauge; hex key |
| Package Quantity | 1 item |
| Country of Origin | USA |
| Warranty | Lee Valley Satisfaction Guarantee |
Options:
Variations:
Incra V120 Miter Gauge
Known for accuracy, ease of use, and sturdy construction, an Incra miter gauge is an excellent upgrade for any table saw. Equally useful on a bandsaw, disc sander or router table, the Incra V120 is an economical but accurate miter gauge.
The protractor head has a patented indexing system for quick, positive adjustment. Adjustable expansion discs in the 3/8" × 3/4" table bars provide low-friction travel and remove lateral play within the miter slot. The head rotates 60° left or right, and has stops at 1° intervals and at ±22 1/2°. Slotted screw holes allow you to attach a shop-made fence for stock support or work with a stop-block.
Made in the USA from plated heavy-gauge steel and aluminum, the V120 gauge simplifies making precise and repeatable cross-grain cuts. The angular accuracy is 1/50 of a degree. A hex key is included for adjustments.
Not available for shipment to Québec.
Choose an option to view item availability.
Choose an option to view item availability.
Choose an option to view item availability.
Choose an option to view item availability.