Mirka DEOS Delta Abranet Kit

This kit pairs a Mirka DEOS Delta electric sander with a selection of Abranet discs to cover a wide range of sanding applications.

With a fine 3mm orbital pattern and a triangular platen that tapers to a narrow point, the sander excels at precise work in corners and tight spots. For broad coverage when needed, it measures 4" at its widest point, with two 6" bevelled sides to sand right up to an edge without contacting adjacent surfaces.

To reduce clean-up time, avoid health risks associated with airborne dust, and eliminate stray abrasive particles to ensure better surface finishes and longer abrasive life, it has a pattern of holes in the platen that distributes suction across the entire sanding disc, and a rear port for connection to a 1" diameter vacuum hose.

Powered by a 14' grounded cord, its 250W brushless motor performs comparably to a 360W conventional motor. It has a low noise rating of 68 dB as well as low vibration output (2.6m/s²) and pairs with the myMirka app to monitor long-term vibration exposure.

In variable-speed mode, the upper control paddle lets you adjust speed on the fly without interrupting your work; pressing the paddle increases the rpms, and a lighter squeeze slows the motor. In fixed-speed mode, you can lock in any of five settings within its 5000 to 10,000 rpm range, with the paddle serving as an on/off switch to stop the tool within seconds. Backed by a 2-year warranty.

The kit comes with 150 mesh abrasive sheets (50 each of 120x, 150x and 180x), which use aluminum oxide grit bonded to a tough polyamide mesh, allowing sanding dust to be drawn through the entire sheet to resist loading and maximize dust recovery.