Q: What does this clamp plate do?
It lets you position a Kreg hold-down clamp anywhere in the perforated top of a Festool MFT/3 table.
50F0214 - MFT/3 Clamp Plate with 20mm Post & Clamp Knob for Kreg Hold-Down Clamps
This mounting plate and post let you quickly position a Kreg hold-down clamp in the perforated table top of a Festool MFT/3 multifunction table. The bolt supplied with the clamp is used to attach it to the mounting plate. The steel post is 20mm in diameter and 11/16" long – just less than the table top’s 3/4” thickness – threaded internally for use with the supplied clamping knob (or an MFT accessory clamping knob).
The steel mounting plate adds 3/8" to the maximum capacity of the Kreg clamps but doesn’t affect their minimum; you can still adjust the clamps to hold materials as thin as a sheet of paper against a surface. The plate can also be used interchangeably with any of our 3/4" diameter posts.
Made in Canada.
It lets you position a Kreg hold-down clamp anywhere in the perforated top of a Festool MFT/3 table.
The bolt supplied with the Kreg clamp fastens it to the mounting plate, and the plate drops into the MFT/3 top on its 20mm post.
No, it adds 3/8" to the clamp's maximum capacity but leaves the minimum unchanged, so you can still clamp stock as thin as a sheet of paper.
Yes, the plate works interchangeably with any of our 3/4" diameter posts.
Yes, a clamp knob is supplied, and an MFT accessory clamping knob can be used in its place.
| Materials | Steel post and mounting plate |
| Dimensions | 20mm dia. × 11/16" long post |
| Compatibility | Fits the perforated top of a Festool MFT/3 table; holds Kreg hold-down clamps; interchangeable with 3/4" dia. posts |
| Capacity | Adds 3/8" to the Kreg clamp's maximum capacity |
| Includes | Mounting plate; 20mm post; clamp knob |
| Package Quantity | 1 set |
| Country of Origin | Canada |
| Warranty | Lee Valley Satisfaction Guarantee |
Options:
Variations:
MFT/3 Clamp Plate with 20mm Post and Clamp Knob for Kreg Hold-Down Clamps
This mounting plate and post let you quickly position a Kreg hold-down clamp in the perforated table top of a Festool MFT/3 multifunction table. The bolt supplied with the clamp is used to attach it to the mounting plate. The steel post is 20mm in diameter and 11/16" long – just less than the table top’s 3/4” thickness – threaded internally for use with the supplied clamping knob (or an MFT accessory clamping knob).
The steel mounting plate adds 3/8" to the maximum capacity of the Kreg clamps but doesn’t affect their minimum; you can still adjust the clamps to hold materials as thin as a sheet of paper against a surface. The plate can also be used interchangeably with any of our 3/4" diameter posts.
Made in Canada.
Choose an option to view item availability.
Choose an option to view item availability.
Choose an option to view item availability.
Choose an option to view item availability.
