Skip to contentAccessibility Statement
ITEM ADDED TO YOUR CART ()
logologoCart
Cart
A turned pen placed next to an open divider box containing pen turning kit components
88K7131 - Pen-Turning Kit, #1 Morse Taper
88K7132 - Pen-Turning Kit, #2 Morse Taper
88K7131 - Pen-Turning Kit, #1 Morse Taper
88K7132 - Pen-Turning Kit, #2 Morse Taper

88K7132 - Pen-Turning Kit, #2 Morse Taper

Pen-Turning Kit

Item undefined, undefined

This item is not available for this region.

To make it easier to get started with the rewarding hobby of pen turning, we’ve put together a convenient kit that contains the parts you need at an approximately 20% saving compared to purchasing the included components separately.


The kit contains three high-quality Berea Hardwoods pen kits (slim ballpoint), a mandrel for securing blanks to the lathe for turning, bushings sized to match the brass tubes in the pen kits, and CA glue. You supply pen blanks of your choice.

Also included are a 7mm brad-point bit for drilling a channel in the blank, and a 7mm pilot shaft and 25mm cutter head for squaring and trimming blanks and removing glue squeeze-out after the brass tube has been glued into the pen body. To allow for mishaps during turning or assembly, extra brass tubes are included.

Stores in a durable polypropylene divider box large enough to keep additional blanks and pen kits organized and accessible.

The kit is available in #1 and #2 Morse taper (MT) versions to fit most lathes; check your lathe’s instruction manual to determine which kind you have.

An easy, economical way to explore pen turning.

A turned pen placed next to an open divider box containing pen turning kit components

Options:

Morse Taper

Variations:

    Pen-Turning Kit

    To make it easier to get started with the rewarding hobby of pen turning, we’ve put together a convenient kit that contains the parts you need at an approximately 20% saving compared to purchasing the included components separately.


    The kit contains three high-quality Berea Hardwoods pen kits (slim ballpoint), a mandrel for securing blanks to the lathe for turning, bushings sized to match the brass tubes in the pen kits, and CA glue. You supply pen blanks of your choice.

    Also included are a 7mm brad-point bit for drilling a channel in the blank, and a 7mm pilot shaft and 25mm cutter head for squaring and trimming blanks and removing glue squeeze-out after the brass tube has been glued into the pen body. To allow for mishaps during turning or assembly, extra brass tubes are included.

    Stores in a durable polypropylene divider box large enough to keep additional blanks and pen kits organized and accessible.

    The kit is available in #1 and #2 Morse taper (MT) versions to fit most lathes; check your lathe’s instruction manual to determine which kind you have.

    An easy, economical way to explore pen turning.

    Related Products

    #1 MT"
    #2 MT"
    88K7100 - Standard Shaft, Nut and Washer
    Standard "A" Mandrels for Pen & Pencil Kits
    Product Information
    88K7831 - Sierra Half-Twist Pen, Chrome
    Example of a completed Sierra half-twist pen beside pen hardware
    88K7830 - Sierra Half-Twist Pen, Gold
    88K7831 - Sierra Half-Twist Pen, Chrome
    88K7832 - Sierra Half-Twist Pen, Satin Gold
    88K7833 - Sierra Half-Twist Pen, Satin Nickel
    88K7624 - Sierra Half-Twist Pen, Gunmetal
    Sierra Half-Twist Pen Hardware
    88K7801 - Streamline Flat-Top Pen, Chrome
    Two examples of completed Streamline Flat-Top pens
    88K7800 - Streamline Flat-Top Pen, Gold
    88K7801 - Streamline Flat-Top Pen, Chrome
    88K7807 - Streamline Flat-Top Pen, Gunmetal
    Streamline Flat-Top Pen Hardware