01W6004 - 4 1/4" Openwork Cast Steel Pull
Reproduced from an antique in the Lee Valley collection, This pull has been cast in steel using the lost wax process – allowing for a more faithful reproduction with finer detail, less flash, and virtually no surface pitting or voids.
Heat treatment is used to darken the steel, with highlights coarsely buffed (somewhat between sanded and polished finishes) to provide contrast. Lacquered to prevent oxidation. Requires #8 screws (not included).
Overall width is 4 1/4".
Options:
Variations:
Cast Steel Cage Pull
Reproduced from an antique in the Lee Valley collection, This pull has been cast in steel using the lost wax process – allowing for a more faithful reproduction with finer detail, less flash, and virtually no surface pitting or voids.
Heat treatment is used to darken the steel, with highlights coarsely buffed (somewhat between sanded and polished finishes) to provide contrast. Lacquered to prevent oxidation. Requires #8 screws (not included).
Overall width is 4 1/4".
