Skip to contentAccessibility Statement
ITEM ADDED TO YOUR CART ()
logologoCart
Cart
Setting the depth of cut for a router bit on a router table using the layout block
05N5821 - Imperial Layout Block, ea.
05N5820 - Imperial Layout Blocks, pkg. of 3
Using a layout block to set the blade of a router plane
Setting the distance between the blade and fence on a table saw using the layout block

Veritas Imperial Layout Block

Veritas Imperial Layout BlockMade in Canada

(0 Reviews)

More details

Option:

From: $11.00

Choose an option to view item availability.

Conveniently pocket sized, this L-shaped gauge block simplifies machine set-up or layout by providing a direct reference for five common Imperial measurements. Changing the block orientation makes it simple to position between a fence and a bit or blade, allowing rapid and accurate adjustment using the 1/8", 1/4", 1/2" or 3/4" sections or the 1" overall length. The precision aluminum extrusion is also accurate enough to use with our set-up blocks.

A hole on one side lets you attach it to a key chain, and an etched rule with graduations in 32nds allows measurements up to one inch. Made in Canada.

Setting the depth of cut for a router bit on a router table using the layout block

Options:

Option

Variations:

  • 05N5821 - Imperial Layout Block, ea.
    1 - $11.00
  • 05N5820 - Imperial Layout Blocks, pkg. of 3
    1 - $25.70

Veritas Imperial Layout Block

Conveniently pocket sized, this L-shaped gauge block simplifies machine set-up or layout by providing a direct reference for five common Imperial measurements. Changing the block orientation makes it simple to position between a fence and a bit or blade, allowing rapid and accurate adjustment using the 1/8", 1/4", 1/2" or 3/4" sections or the 1" overall length. The precision aluminum extrusion is also accurate enough to use with our set-up blocks.

A hole on one side lets you attach it to a key chain, and an etched rule with graduations in 32nds allows measurements up to one inch. Made in Canada.

Related Products

Making a layout mark on a workpiece using the Veritas metric layout block
Using the Veritas metric layout block to set the drill bit depth in a drill press.
05N5831 - Veritas Metric Layout Block, ea.
05N5830 - Veritas Metric Layout Block, pkg. of 3
05N5831 - Veritas Metric Layout Block, ea.
Veritas Metric Layout Block

Choose an option to view item availability.

Product Information
Registering a 1 1/2"" Pocket Layout Square against the edge of a workpiece while marking a cut line
Using a Veritas 1 1/2"" Pocket Layout Square over a tape measure to strike a line on a workpiece
Using a Veritas 1 1/2"" Pocket Layout Square to measure a small hinge leaf
Using a 1 1/2"" Pocket Layout Square and a striking knife to mark out a hinge gain on a workpiece
Using the protractor scale marked on a 1 1/2"" Pocket Layout Square to lay out an angled cut line
Using the 1/4"" side of the 1 1/2"" Pocket Square’s base to mark out a mortise centered on 3/4"" stock
A woodworker slips a Veritas 1 1/2"" Pocket Layout Square into the pocket of a workshop apron
05N5410 - Veritas 1 1/2"" Pocket Layout Square
05N5410 - Veritas 1 1/2"" Pocket Layout Square
Veritas 1 1/2" Pocket Layout Square

$11.80

Choose an option to view item availability.

Product Information
Holding a drill bit against the drill stop gauge while tightening the drill stop hex key
05N7701 - Veritas Drill Stop Gauge
Veritas Drill Stop Gauge

$9.50

Choose an option to view item availability.

Product Information
30N3200 - 6" Starrett Depth Gauge
30N3201 - 150mm Starrett Depth Gauge
30N3202 - 6" Starrett Depth/Angle Gauge
30N3204 - 6" Starrett Depth/Angle Gauge with Hook Rule and Rod
Starrett Depth/Angle Gauges
Starrett Depth/Angle Gauges

Choose an option to view item availability.

Product Information