Skip to contentAccessibility Statement
ITEM ADDED TO YOUR CART ()
logologoCart
Search
Cart
70M2120 - Set of 4 (3 Dovetail Markers, 1 Saddle Square)
A dovetail being laid out on wood along the angled side of a dovetail marker
A line being laid out at the edge of a board with a saddle square
70M2107 - 1:8 Union Manufacturing Dovetail Marker
70M2108 - 1:7 Union Manufacturing Dovetail Marker
70M2109 - 1:6 Union Manufacturing Dovetail Marker
70M2110 - 90° Union Manufacturing Saddle Square
70M2120 - Set of 4 (3 Dovetail Markers, 1 Saddle Square)
70M2120 - Set of 4 (3 Dovetail Markers, 1 Saddle Square)
A dovetail being laid out on wood along the angled side of a dovetail marker
A line being laid out at the edge of a board with a saddle square
70M2107 - 1:8 Union Manufacturing Dovetail Marker
70M2108 - 1:7 Union Manufacturing Dovetail Marker
70M2109 - 1:6 Union Manufacturing Dovetail Marker
70M2110 - 90° Union Manufacturing Saddle Square
70M2120 - Set of 4 (3 Dovetail Markers, 1 Saddle Square)

Union Manufacturing Dovetail Markers & Saddle SquareMade in U.S.A.

This item is not available for this region.

Dovetail markers and saddle squares are indispensable tools for marking out quick, accurate and consistent dovetails and large finger joints.

Each marker is precision milled from one solid piece of stainless steel, with the inside surface textured to prevent slipping while laying out your lines. They ensure perfect alignment by allowing the straight and angled lines to be scribed at the same time, around corners as one continuous line.

Each measures 2" long and 3/8" thick, to facilitate marking on either edge of a board. The markers are available in the most common angles for dovetails, 1:8, 1:7, 1:6 and 90° for the saddle square.

Available individually or as a set of all four.

Made in USA.

70M2120 - Set of 4 (3 Dovetail Markers, 1 Saddle Square)

Options:

Option

Variations:

    Union Manufacturing Dovetail Markers & Saddle Square

    Dovetail markers and saddle squares are indispensable tools for marking out quick, accurate and consistent dovetails and large finger joints.

    Each marker is precision milled from one solid piece of stainless steel, with the inside surface textured to prevent slipping while laying out your lines. They ensure perfect alignment by allowing the straight and angled lines to be scribed at the same time, around corners as one continuous line.

    Each measures 2" long and 3/8" thick, to facilitate marking on either edge of a board. The markers are available in the most common angles for dovetails, 1:8, 1:7, 1:6 and 90° for the saddle square.

    Available individually or as a set of all four.

    Made in USA.

    Related Products

    Using an Accu-Burr handled burnisher to roll 15° hooks on the edge of a scraper held in a vise
    Using an Accu-Burr handled burnisher to roll 15° hooks on the concave edge of a scraper clamped in a vise
    A close-up view of an Accu-Burr handled burnisher rolling 15° hooks on the edge of a scraper
    A diagram showing the 5°, 10° and 15° V-shaped grooves on an Accu-Burr burnisher
    70M2102 - Accu-Burr Handled Burnisher
    70M2102 - Accu-Burr Handled Burnisher
    Accu-Burr Handled Burnisher
    Product Information
    Veritas Dovetail Saws
    05T0501 - Standard Dovetail Saw, 14 tpi
    05T0505 - Fine-Tooth Dovetail Saw, 20 tpi
    Cutting into a board with a Veritas Standard Dovetail Saw
    Close-up of hardwood handle
    Saw handle disassembled to show fastener
    Top view of Veritas Standard Dovetail Saw
    Close-up of saw teeth
    Close-up of saw teeth
    05T0501 - Standard Dovetail Saw, 14 tpi
    05T0505 - Fine-cut Dovetail Saw, 20 tpi
    Veritas Dovetail Saws