Skip to contentAccessibility Statement
ITEM ADDED TO YOUR CART ()
logologoCart
Cart
Stainless-Steel Cabinetmaker's Rules
Four stainless-steel cabinetmaker’s rules of varying sizes hung on a wall.
Using a cabinetmaker’s rule and pencil to mark a line on wood.
06K2006 - 6"" Stainless-Steel Cabinetmaker's Rule
06K2012 - 12"" Stainless-Steel Cabinetmaker's Rule
06K2018 - 18"" Stainless-Steel Cabinetmaker's Rule
06K2024 - 24"" Stainless-Steel Cabinetmaker's Rule
06K2036 - 36" Stainless Steel Cabinetmaker's Rule
06K2050 - Stainless Steel Cabinetmaker's Rule, set of 4 (24",18",12",6")
06K2006 - 6" Stainless-Steel Cabinetmaker's Rule
06K2018 - 18" Stainless Steel Cabinetmaker's Rule
06K2024 - 24" Stainless Steel Cabinetmaker's Rule
06K2040 - 40"" Stainless-Steel Cabinetmaker's Rule
06K2050 - Stainless Steel Cabinetmaker's Rule, set of 4 (24",18",12",6")

Stainless-Steel Cabinetmaker's Rules

Stainless-Steel Cabinetmaker's Rules

(0 Reviews)

Length:

From: $4.90

Choose an option to view item availability.

These are finely made rules.

Hardened stainless steel with a matte finish; all markings are etched and black-filled. The edges are milled and each rule is Imperial/metric. Graduations are mm and 16ths, with smaller sections in 1/2mm, 32nds and 64ths. Reverse side has Imperial/metric, tap drill and thread conversion charts (6" rule has only an Imperial/metric chart).

One of the best buys in rules we've ever seen.

Stainless-Steel Cabinetmaker's Rules

Options:

Length

Variations:

  • 06K2006 - 6" Stainless-Steel Cabinetmaker's Rule
    1 - $4.90
  • Using a cabinetmaker’s rule and pencil to mark a line on wood.
    1 - $8.40
  • 06K2018 - 18" Stainless Steel Cabinetmaker's Rule
    1 - $13.90
  • 06K2024 - 24" Stainless Steel Cabinetmaker's Rule
    1 - $19.50
  • 06K2036 - 36" Stainless Steel Cabinetmaker's Rule
    1 - $24.50
  • 06K2040 - 40"" Stainless-Steel Cabinetmaker's Rule
    1 - $24.50
  • Set of 4 Stainless Steel Cabinetmaker's Rules displayed with wood and a marking knife
    1 - $39.50

Stainless-Steel Cabinetmaker's Rules

These are finely made rules.

Hardened stainless steel with a matte finish; all markings are etched and black-filled. The edges are milled and each rule is Imperial/metric. Graduations are mm and 16ths, with smaller sections in 1/2mm, 32nds and 64ths. Reverse side has Imperial/metric, tap drill and thread conversion charts (6" rule has only an Imperial/metric chart).

One of the best buys in rules we've ever seen.

Related Products

Cast Masons' & Engravers' Square in use, with original vintage square in background
15N0701 - Cast Masons' & Engravers' Square
Close-up of brass clamping knob
Cast Masons' & Engravers' Square

$53.50

Choose an option to view item availability.

Product Information
Registering a 1 1/2"" Pocket Layout Square against the edge of a workpiece while marking a cut line
Using a Veritas 1 1/2"" Pocket Layout Square over a tape measure to strike a line on a workpiece
Using a Veritas 1 1/2"" Pocket Layout Square to measure a small hinge leaf
Using a 1 1/2"" Pocket Layout Square and a striking knife to mark out a hinge gain on a workpiece
Using the protractor scale marked on a 1 1/2"" Pocket Layout Square to lay out an angled cut line
Using the 1/4"" side of the 1 1/2"" Pocket Square’s base to mark out a mortise centered on 3/4"" stock
A woodworker slips a Veritas 1 1/2"" Pocket Layout Square into the pocket of a workshop apron
05N5410 - Veritas 1 1/2"" Pocket Layout Square
05N5410 - Veritas 1 1/2"" Pocket Layout Square
Veritas 1 1/2" Pocket Layout Square

$11.80

Choose an option to view item availability.

Product Information
Using the 4" precision double square to lay out a joint on a workpiece
Two 4" Double Squares next to a block of wood
Two 4" Double Squares placed on a table saw
Two 4" Double Squares placed on a table saw
24N0801 - 4" Double Square
Two 4" Double Squares placed on a wooden tenon
24N0802 - 6" Double Square
Precision Double Square
Precision Double Square

Choose an option to view item availability.

Product Information
Using the Veritas Workshop Striking Knife and a pocket layout square to mark a workpiece
05D2005 - Veritas Workshop Striking Knife
Close-up of Striking Knife blade
05D2005 - Veritas Workshop Striking Knife
Veritas Workshop Striking Knife

$24.50

  • 1+ $24.50
  • 3+ $22.05

Choose an option to view item availability.

Product Information