Q: What is the Veritas Miter Plane used for?
It functions as a large block plane suited to end-grain work such as chamfering, trimming and fitting moldings, as well as squaring or trimming on a shooting board or miter jack.
Veritas Miter Plane
Blade Material:
Choose an option to view item availability.
Inspired by antique Scottish miter planes, this plane offers a comfortable grip whether you use it on its side or upright. When shooting, the side-mounted horn lets you push the plane with the web of your thumb while holding it tight to the workpiece with your fingers, leaving your other hand free to hold the workpiece. The shooting horn can be attached on either side of the plane for right- or left-handed use. When using it upright, deep finger grooves in the sides and the front knob provide a secure grip while the rear knob provides a comfortable palm rest for driving the plane forward. Both the knobs and the shooting horn are made of torrefied maple.
The body is fully stress-relieved, ductile cast iron, with both sides machined flat and square to the sole. Its mass and size are advantages for shooting and creating miters for larger work such as moldings. Weighing almost 5 lb, it has a heft that provides good inertia. Its 10 1/2" long and 2 5/8" wide sole, with a toe fully one third the length, gives it solid registration even when used at an angle for a skewed cut, such as on a miter jack.
By loosening the front knob, the plane’s adjustable mouth can be set to a fine opening; a brass thumbscrew retains mouth settings and prevents the toe from contacting the blade.
A bevel-up plane, it has a low 12° bed angle and 25° blade bevel that give it a combined cutting angle of 37° for clean end-grain cuts. The 2" wide, 3/16" thick lapped blade is available in O1 or PM-V11 tool steel. The Norris-style adjuster extends under the rear knob to allow easy adjustment while staying out of the way. Two blade guide screws prevent lateral blade shifting.
Made in Canada.
It functions as a large block plane suited to end-grain work such as chamfering, trimming and fitting moldings, as well as squaring or trimming on a shooting board or miter jack.
Yes, the removable shooting horn can be attached to either side of the plane, letting left- or right-handed users hold it comfortably while shooting.
The blade is available in O1 tool steel or PM-V11 tool steel, which offers greater edge retention while still being easy to sharpen with conventional abrasives.
Remove the rust preventative coating with a rag dampened in mineral spirits, then apply a light coat of silicone-free paste wax initially and periodically afterward to seal out moisture and prevent rust.
The plane weighs almost 5 lb, giving it the heft and inertia useful for shooting and mitering larger work such as moldings.
| Materials | Ductile cast-iron body; hardwood knobs and shooting horn; O1 or PM-V11 tool steel blade |
| Color/Finish | Black and brass |
| Dimensions | 10 1/2" long × 2 5/8" wide sole; 2" wide × 3/16" thick blade |
| Weight | About 5 lb |
| Includes | Miter plane |
| Package Quantity | 1 item |
| Country of Origin | Canada |
| Certifications | Patented |
| Warranty | Lee Valley Satisfaction Guarantee |
Options:
Blade Material
Variations:
Veritas Miter Plane
Inspired by antique Scottish miter planes, this plane offers a comfortable grip whether you use it on its side or upright. When shooting, the side-mounted horn lets you push the plane with the web of your thumb while holding it tight to the workpiece with your fingers, leaving your other hand free to hold the workpiece. The shooting horn can be attached on either side of the plane for right- or left-handed use. When using it upright, deep finger grooves in the sides and the front knob provide a secure grip while the rear knob provides a comfortable palm rest for driving the plane forward. Both the knobs and the shooting horn are made of torrefied maple.
The body is fully stress-relieved, ductile cast iron, with both sides machined flat and square to the sole. Its mass and size are advantages for shooting and creating miters for larger work such as moldings. Weighing almost 5 lb, it has a heft that provides good inertia. Its 10 1/2" long and 2 5/8" wide sole, with a toe fully one third the length, gives it solid registration even when used at an angle for a skewed cut, such as on a miter jack.
By loosening the front knob, the plane’s adjustable mouth can be set to a fine opening; a brass thumbscrew retains mouth settings and prevents the toe from contacting the blade.
A bevel-up plane, it has a low 12° bed angle and 25° blade bevel that give it a combined cutting angle of 37° for clean end-grain cuts. The 2" wide, 3/16" thick lapped blade is available in O1 or PM-V11 tool steel. The Norris-style adjuster extends under the rear knob to allow easy adjustment while staying out of the way. Two blade guide screws prevent lateral blade shifting.
Made in Canada.
