Fret-Saw/Scroll Saw Blades

These 5" blades are suitable for fret saws or power scroll saws.

The skip-tooth pattern gives good chip clearance and a fast rate of cut. They can be used for cutting plastic, tagua, bone, and hard rubber as well as wood. Sizes range from #2/0 for marquetry or similar fine work, to #9 for cutting thicker material up to 2". It is useful to have all styles on hand.

• The #2/0 blade has 30 tpi and is 0.009" thick by 0.025" wide



• The #1 blade has 25 tpi and is 0.012" thick by 0.025" wide



• The #3 blade has 18 tpi and is 0.013" thick by 0.030" wide



• The #5 blade has 16 tpi and is 0.015" thick by 0.040" wide



• The #7 blade has 14 tpi and is 0.018" thick by 0.045" wide



• The #9 blade has 14 tpi and is .020" thick by 0.053" wide

Sold in packages of 12.