Skip to contentAccessibility Statement
ITEM ADDED TO YOUR CART ()
logologoCart
Cart
Cutting bowls with the Bowlsaver system, using a light guide to plot the cuts on the wooden blank
Positioning a Bowlsaver light guide over a wooden bowl blank by inserting it into the horizontal arm
53B0432 - Bowlsaver Light Guide
53B0432 - Bowlsaver Light Guide

53B0432 - Bowlsaver Light Guide

Bowlsaver Light Guide

Item 53B0432, Bowlsaver Light Guide
$165.00
Online: Loading...

This laser pointer casts a tightly focused dot of bright red light to show exactly how your cut will travel through the blank before you turn.

The pointer fits into a horizontal arm supported by a 7 1/2" rigid steel rod that mounts onto the Bowlsaver turntable. As the rod pivots on the turntable, the pointer swings on a curved path that traces the cutter's motion. It has three preset positions, corresponding to the coring profiles of all cutters supplied with either of the Bowlsaver systems we offer.

Rechargeable (Micro USB cable not included).

Cutting bowls with the Bowlsaver system, using a light guide to plot the cuts on the wooden blank

Options:

Variations:

  • 53B0432 - Bowlsaver Light Guide
    1 - $165.00

Bowlsaver Light Guide

This laser pointer casts a tightly focused dot of bright red light to show exactly how your cut will travel through the blank before you turn.

The pointer fits into a horizontal arm supported by a 7 1/2" rigid steel rod that mounts onto the Bowlsaver turntable. As the rod pivots on the turntable, the pointer swings on a curved path that traces the cutter's motion. It has three preset positions, corresponding to the coring profiles of all cutters supplied with either of the Bowlsaver systems we offer.

Rechargeable (Micro USB cable not included).

Related Products

Making the first cut into a wooden bowl blank on a lathe using the Bowlsaver Original system
One of a set of nesting bowls rough-cut from a wooden blank using the Bowlsaver Original system
A Bowlsaver Original cutter guided on the turntable base as it cuts into a wooden bowl-turning blank
A Bowlsaver Original cutter retracted from a bowl blank, showing how the turntable guides the cut
Two nesting bowls rough-cut from the same wooden blank using the Bowlsaver Original system
53B0430 - Bowlsaver Original
53B0430 - Bowlsaver Original
Woodcut Bowlsaver Original
Product Information
Making the first cut into a wooden bowl blank on a lathe using the Bowlsaver Max4 system
A Bowlsaver Max4 cutter guided on the turntable base as it cuts into a wooden bowl-turning blank
Using a template to lay out cuts before using the Bowlsaver Max4 to cut bowls from a wooden blank
A close-up view of a Bowlsaver Max4 cutter penetrating a wooden blank on a turntable-guided path
A set of three nesting bowls cut from a single wooden turning blank using the Bowlsaver Max4 system
53B0431 - Woodcut Bowlsaver Max4
53B0431 - Woodcut Bowlsaver Max4
Woodcut Bowlsaver Max4
Product Information
The center saver being used to remove the center of a large bowl to produce a smaller bowl from the same wood blank
53B0201 - Mini Center-Saver System
Example of four nesting bowls made with the center-saver system
53B0202 - Standard Center-Saver System
53B0203 - Large Center-Saver System
53B0225 - Combo Mini/StandardCenter-Saver System
53B0226 - Combo Standard/LargeCenter-Saver System
53B0227 - Combo Mini/Standard/LargeCenter-Saver System
The center saver being used to remove the center of a large bowl to produce a smaller bowl from the same wood blank
McNaughton Center-Saver System
Product Information
A lathe with a mounted digital display controller
A long blank turning on a lathe and being shaped by a chisel
A lathe with an open headstock displaying a belt-driven spindle
A rear-mounted holder on a lathe holds two spindle-locking wrenches and a knockout bar
03J7316 - Rikon 14"" x 20"" Variable-Speed Midi Lathe
Rikon 14" × 20" Midi Lathe (70-1420VSR)
Product Information