Skip to contentAccessibility Statement
ITEM ADDED TO YOUR CART ()
logologoCart
Search
Cart
25K6055 - Micro-Pocket Drill Guide
Using the guide to drill a pocket hole in a board
25K6055 - Micro-Pocket Drill Guide
Using the guide to drill a pocket hole in a board

Kreg Micro-Pocket Drill GuideMade in U.S.A.

This item is not available for this region.

Discontinued. Limited stock.

A retrofit drill-guide block for the K4 jig and K5 system, the micro-pocket guide lets you take advantage of the simplicity and speed of pocket-hole joinery when using thin stock. Specifically designed for 1/2" to 3/4" material (but also effective in thicker work), it functions identically to the standard drilling block, but uses a 19/64" step drill instead of 3/8". This not only lets you counterbore screws as small as #6x3/4", it also allows you to space the screws closer together – as needed for small-scale work or repair jobs in tight spots.

Set includes the steel and glass-filled nylon drilling block, a 19/64" HSS step drill bit with a 1/4" hex shank, a depth collar and hex key, plus a selection of fine thread self-tapping screws (3/4", 1" and 1 1/4" #6 pan head).

Additional step drill bits and pocket screws are available separately.

Made in USA.

25K6055 - Micro-Pocket Drill Guide

Options:

Variations:

    Kreg Micro-Pocket Drill Guide

    Discontinued. Limited stock.

    A retrofit drill-guide block for the K4 jig and K5 system, the micro-pocket guide lets you take advantage of the simplicity and speed of pocket-hole joinery when using thin stock. Specifically designed for 1/2" to 3/4" material (but also effective in thicker work), it functions identically to the standard drilling block, but uses a 19/64" step drill instead of 3/8". This not only lets you counterbore screws as small as #6x3/4", it also allows you to space the screws closer together – as needed for small-scale work or repair jobs in tight spots.

    Set includes the steel and glass-filled nylon drilling block, a 19/64" HSS step drill bit with a 1/4" hex shank, a depth collar and hex key, plus a selection of fine thread self-tapping screws (3/4", 1" and 1 1/4" #6 pan head).

    Additional step drill bits and pocket screws are available separately.

    Made in USA.