Skip to contentAccessibility Statement
ITEM ADDED TO YOUR CART ()
A Rikon Z4 chuck with 50mm standard jaws, a right-hand wood screw and other accessories
A Rikon Z4 chuck mounted on a lathe
A Rikon Z4 chuck with 50mm standard jaws mounted on a lathe

03J7504 - Rikon Z4 Insert-Type Lathe Chuck Set (71-106)

Rikon Z4 Insert-Type Lathe Chuck Set (71-106)

(0 Reviews)
Item 03J7504, Rikon Z4 Insert-Type Lathe Chuck Set (71-106)
$160.00$136.00
Online: Loading...

Designed for larger lathes and heavier turning, the Z4 is a four-jaw, self-centering scroll chuck rated for workpieces up to 20" in diameter and 6" thick.

Its 3 7/8" machined steel body is larger and heavier than the Z3, providing a more substantial platform for large bowls, platters and hollow forms. The geared mechanism is operated with a dedicated hex-ended chuck key. Unlike the Z3, the Z4 has an enclosed rear scroll mechanism and covered side-key engagement points, helping shield the gearing from dust and debris.

The insert-type mounting system accepts the same range of interchangeable spindle-thread inserts as the Z3. Choose the insert that matches your lathe spindle; should you later change lathes, you can generally continue using the chuck by fitting a different insert. Inserts sold separately.

The numbered jaw segments correspond with numbered sliders for correct installation. The sliders retract fully within the chuck body and remain essentially flush with its perimeter at maximum extension.

Supplied with 50mm standard jaws, a right-hand wood screw, Z4 chuck key, T20 star driver, 3mm hex key, eight M6 × 10 jaw screws, an M6 × 6 retaining screw and instructions.

The supplied wood screw is suitable for blanks up to 10" in diameter by 4" thick, at a maximum speed of 600 rpm. Rikon specifies a pilot hole 9/16" deep and 5/16" in diameter for softwood or 9/32" for hardwood.

Covered by a 10-year warranty.


A Rikon Z4 chuck with 50mm standard jaws, a right-hand wood screw and other accessories

Options:

Variations:

  • 03J7504 - Rikon Z4 Insert-Type Lathe Chuck Set (71-106)
    1 - $136.00

Rikon Z4 Insert-Type Lathe Chuck Set (71-106)

Designed for larger lathes and heavier turning, the Z4 is a four-jaw, self-centering scroll chuck rated for workpieces up to 20" in diameter and 6" thick.

Its 3 7/8" machined steel body is larger and heavier than the Z3, providing a more substantial platform for large bowls, platters and hollow forms. The geared mechanism is operated with a dedicated hex-ended chuck key. Unlike the Z3, the Z4 has an enclosed rear scroll mechanism and covered side-key engagement points, helping shield the gearing from dust and debris.

The insert-type mounting system accepts the same range of interchangeable spindle-thread inserts as the Z3. Choose the insert that matches your lathe spindle; should you later change lathes, you can generally continue using the chuck by fitting a different insert. Inserts sold separately.

The numbered jaw segments correspond with numbered sliders for correct installation. The sliders retract fully within the chuck body and remain essentially flush with its perimeter at maximum extension.

Supplied with 50mm standard jaws, a right-hand wood screw, Z4 chuck key, T20 star driver, 3mm hex key, eight M6 × 10 jaw screws, an M6 × 6 retaining screw and instructions.

The supplied wood screw is suitable for blanks up to 10" in diameter by 4" thick, at a maximum speed of 600 rpm. Rikon specifies a pilot hole 9/16" deep and 5/16" in diameter for softwood or 9/32" for hardwood.

Covered by a 10-year warranty.

Related Products

Rikon 71-121 Chuck Insert, 1" × 8 tpi UNC RH
Mounting a Rikon 1" × 8 tpi UNC RH chuck insert onto a Rizon Z4 lathe chuck
Rikon 71-122 Chuck Insert, 1 1/4" × 8 tpi UNC RH
Mounting a Rikon 1 1/4" × 8 tpi UNC RH chuck insert onto a Rizon Z4 lathe chuck
Rikon 71-123 Chuck Insert, M30 × 3.5 RH
Mounting a Rikon M30 × 3.5 RH chuck insert onto a Rizon Z4 lathe chuck
Rikon 71-124 Chuck Insert, 5/8" Plain Bore
Mounting a Rikon 5/8" plain bore chuck insert onto a Rizon Z4 lathe chuck
Rikon 71-125 Chuck Insert, 3/4" × 16 tpi RH
Mounting a Rikon 3/4" × 16 tpi RH chuck insert onto a Rizon Z4 lathe chuck
Rikon 71-120 Chuck Insert, M33 × 3.5 ISO RH
Mounting a Rikon M33 × 3.5 ISO RH chuck insert onto a Rizon Z4 lathe chuck
Rikon Chuck Inserts

From: $28.00

Choose an option to view item availability.

Product Information