This item is not available for this region.
Discontinued. Limited stock.
With their extended length and tapered section, these jaws offer the advantage of providing clearance between the chuck and the workpiece for close-in tool work on the underside of a bowl or a vase bottom.
The lip of the jaw has internal and external faces with smooth, non-marring dovetails for gripping a short tenon and expansion into a recessed foot. The jaws also have a deep recess to firmly hold the long tenons required when working at a distance from the headstock without tailstock support.
Available in two versions: 35mm (1 3/8") for all Axminster chucks, and 50mm (2") for the K10 and Goliath. Screw-mounted inserts are available separately for the large jaws to reduce their diameter (spigot size noted).
The 35mm (1 3/8”) O’Donnell jaws are compatible with the K8, K10 and Goliath chucks and have an internal gripping capacity between 1 3/16” and 1 31/32”, an external gripping capacity between 1 25/32” and 2 9/16” and an optimum gripping capacity between 1 3/8” and 1 25/32”.
The 50mm (2”) O’Donnell jaws are compatible with the K10 chuck and have an internal gripping capacity between 1 7/8” and 2 27/32”, an external gripping capacity between 2 3/8” and 3 11/32” and an optimum gripping capacity between 1 31/32” and 2 15/32”. The jaws are also compatible with the Goliath chuck and have an internal gripping capacity between 1 7/8” and 4 1/32”, an external gripping capacity between 2 3/8” and 4 17/32” and an optimum gripping capacity between 1 31/32” and 2 15/32”.
Online only.
Options:
Option
Variations:
Axminster O'Donnell Spigot Jaws
Discontinued. Limited stock.
With their extended length and tapered section, these jaws offer the advantage of providing clearance between the chuck and the workpiece for close-in tool work on the underside of a bowl or a vase bottom.
The lip of the jaw has internal and external faces with smooth, non-marring dovetails for gripping a short tenon and expansion into a recessed foot. The jaws also have a deep recess to firmly hold the long tenons required when working at a distance from the headstock without tailstock support.
Available in two versions: 35mm (1 3/8") for all Axminster chucks, and 50mm (2") for the K10 and Goliath. Screw-mounted inserts are available separately for the large jaws to reduce their diameter (spigot size noted).
The 35mm (1 3/8”) O’Donnell jaws are compatible with the K8, K10 and Goliath chucks and have an internal gripping capacity between 1 3/16” and 1 31/32”, an external gripping capacity between 1 25/32” and 2 9/16” and an optimum gripping capacity between 1 3/8” and 1 25/32”.
The 50mm (2”) O’Donnell jaws are compatible with the K10 chuck and have an internal gripping capacity between 1 7/8” and 2 27/32”, an external gripping capacity between 2 3/8” and 3 11/32” and an optimum gripping capacity between 1 31/32” and 2 15/32”. The jaws are also compatible with the Goliath chuck and have an internal gripping capacity between 1 7/8” and 4 1/32”, an external gripping capacity between 2 3/8” and 4 17/32” and an optimum gripping capacity between 1 31/32” and 2 15/32”.
Online only.
