Q: Which sanders does this edge sanding guide fit?
The Festool Edge Sanding Guide AH-ES-ETS/ETSC fits the Festool ETS 125 REQ and ETSC 125 sanders.
Festool Edge Sanding Guide AH-ES-ETS/ETSC
This item is not available for this region.
With the edge sander, you can effortlessly sand small and large workpieces, narrow and wide edges (5mm to 60mm), sloped surfaces (43°-92°) and external curves on the outline (e.g., on a round dining table). You can work up to the inside corners.
In hard mode (setting for pre-sanding), the edge is sanded according to the set angle. In soft mode (setting for intermediate sanding), the edge sander adapts precisely to the surface to be sanded – this means that neither paint nor filler is sanded through.
It is easy and quick to replace the slideway lining on the crossheaded guide to match the surface. Velour linings for delicate surfaces, and plastic lining for all other surfaces.
For ETS 125 REQ and ETSC 125.
Main Applications:
Items Included:
To order replacement parts for Festool products, please contact our customer service department.
Designed and manufactured in Germany.
The Festool Edge Sanding Guide AH-ES-ETS/ETSC fits the Festool ETS 125 REQ and ETSC 125 sanders.
Hard mode holds the sanding pad at your set angle, which is the setting to use for pre-sanding. Soft mode lets the pad adapt precisely to the surface instead, so you don't sand through paint or filler during intermediate sanding.
It handles narrow and wide edges from 5mm to 60mm, along with sloped surfaces from 43° to 92° and external curves.
Yes, you can work right up to the inside corners with the edge sanding guide in place.
A velour lining and a plastic lining are both included. We recommend the velour lining on delicate surfaces to avoid marring them, and the plastic lining for all other surfaces.
| Materials | Metal base runner; velour and plastic slideway linings |
| Package Quantity | 1 item |
| Country of Origin | Germany |
| Compatibility | Fits Festool ETS 125 REQ and ETSC 125 sanders |
| Includes | Edge sanding guide; LAS-H-ES base runner; LAS-W-ES base runner; WAF 5 hex key |
| Capacity | Edge width 5mm-60mm; angle range 43°-92° |
| Warranty | Lee Valley Satisfaction Guarantee |
Options:
Variations:
Festool Edge Sanding Guide AH-ES-ETS/ETSC
With the edge sander, you can effortlessly sand small and large workpieces, narrow and wide edges (5mm to 60mm), sloped surfaces (43°-92°) and external curves on the outline (e.g., on a round dining table). You can work up to the inside corners.
In hard mode (setting for pre-sanding), the edge is sanded according to the set angle. In soft mode (setting for intermediate sanding), the edge sander adapts precisely to the surface to be sanded – this means that neither paint nor filler is sanded through.
It is easy and quick to replace the slideway lining on the crossheaded guide to match the surface. Velour linings for delicate surfaces, and plastic lining for all other surfaces.
For ETS 125 REQ and ETSC 125.
Main Applications:
Items Included:
To order replacement parts for Festool products, please contact our customer service department.
Designed and manufactured in Germany.