Skip to contentAccessibility Statement
ITEM ADDED TO YOUR CART ()
logologoCart
Cart
Using a bandsaw and MagFence to resaw a board that is registered against a 5" sacrificial wear face
86N5055 - 5" Sacrificial Wear Face for Magfence II

86N5055 - 5" Sacrificial Wear Face for Magfence II

5" Sacrificial Wear Face for Magfence II

(0 Reviews)
Item 86N5055, 5" Sacrificial Wear Face for Magfence II
$31.95
Online: Loading...
Bandsaw Blades
Shop Our Complete Line of Bandsaw Blades

Designed for use with the Magfence II, this sacrificial plastic wear face extends the height of your magnetic fence for resaw work. The plastic face will not wear. It bolts directly to your magnetic fence at both ends, using the existing channels. Accidental contact with a blade will not damage the blade or the fence.

A 3" tall sacrificial face is also available.

Using a bandsaw and MagFence to resaw a board that is registered against a 5" sacrificial wear face

Options:

Variations:

  • 86N5055 - 5" Sacrificial Wear Face for Magfence II
    1 - $31.95

5" Sacrificial Wear Face for Magfence II

Designed for use with the Magfence II, this sacrificial plastic wear face extends the height of your magnetic fence for resaw work. The plastic face will not wear. It bolts directly to your magnetic fence at both ends, using the existing channels. Accidental contact with a blade will not damage the blade or the fence.

A 3" tall sacrificial face is also available.

Related Products

Using the MagFence to square a small log that is registered against a 3" sacrificial wear face
Making the last cut to square a small log, using the 3" sacrificial wear face mounted to a MagFence
Making the last cut to square a small log, using the 3" sacrificial wear face mounted to a MagFence
86N5053 - 3" Sacrificial Wear Face for Magfence II
3" Sacrificial Wear Face for Magfence II

$26.95

Choose an option to view item availability.

Product Information
A MagFence II attached to a bandsaw table to the left of the blade, viewed from the rear of the fence
A switchable magnet being used to attach a MagFence II
MagFence II attached to a bandsaw table, viewed from the face side of the fence
A piece of wood being resawn, guided by the MagFence II
86N5052 - Magfence II
Magfence II

$194.00

Choose an option to view item availability.

Product Information
A F.A.S.T. fence magnetic block attached to a bandsaw blade
A F.A.S.T. fence magnetic block attached to a bandsaw blade
A F.A.S.T. fence magnetic block attached to a bandsaw blade, with a magnetic fence to the left of it, ready for alignment
86N5050 - F.A.S.T. Fence Alignment System Tool
F.A.S.T. Fence Alignment System Tool

$66.50

Choose an option to view item availability.

Product Information