Skip to contentAccessibility Statement
ITEM ADDED TO YOUR CART ()
logologoCart
Cart
86H0612 - 1/4" flush-trim upcut bit next to a wooden workpiece on a template
86H0613 - 1/2" flush-trim upcut bit next to a wooden workpiece on a template
86H0612 - 1/4" × 1" Flush-Trim Upcut Spiral Bit
86H0613 - 1/2" × 1 1/4" Flush-Trim Upcut Spiral Bit

86H0612 - 1/4" × 1" Flush-Trim Upcut Spiral Bit

Amana Flush-Trim Upcut Spiral BitsMade in U.S.A.

Quantity:

From: $95.50

Choose an option to view item availability.

These premium-quality flush-trimming bits have spiral flutes that draw chips toward the shank, much like a drill bit, leaving a clean, chip-free edge on the opposite face of the work. With built-in guide bearings to follow a template, they cut with a continuous shearing action, which helps follow the template precisely by minimizing chatter. They clear waste efficiently, allowing faster cuts without overheating, and pull the router and workpiece together to help maintain accuracy.

Measurements given are cut diameter by height. The 1/4" bit is 3" long, and the 1/2" bit is 4" long. Each is shanked to size and has a micro-thin protective ceramic coating that provides good lubricity to reduce heat build-up, oxidation and wear.

Made in USA.

86H0612 - 1/4" flush-trim upcut bit next to a wooden workpiece on a template

Options:

Option

Variations:

  • 86H0612 - 1/4" × 1" Flush-Trim Upcut Spiral Bit
    1 - $95.50
  • 86H0613 - 1/2" × 1 1/4" Flush-Trim Upcut Spiral Bit
    1 - $159.00

Amana Flush-Trim Upcut Spiral Bits

These premium-quality flush-trimming bits have spiral flutes that draw chips toward the shank, much like a drill bit, leaving a clean, chip-free edge on the opposite face of the work. With built-in guide bearings to follow a template, they cut with a continuous shearing action, which helps follow the template precisely by minimizing chatter. They clear waste efficiently, allowing faster cuts without overheating, and pull the router and workpiece together to help maintain accuracy.

Measurements given are cut diameter by height. The 1/4" bit is 3" long, and the 1/2" bit is 4" long. Each is shanked to size and has a micro-thin protective ceramic coating that provides good lubricity to reduce heat build-up, oxidation and wear.

Made in USA.