Skip to contentAccessibility Statement
ITEM ADDED TO YOUR CART ()
logologoCart
Cart
86H0615 - 1/4" Flush-Trim Compression Bit
86H0616 - 1/2" Flush-Trim Compression Bit
86H0615	1/4" Flush-Trim Compression Bit
86H0616 - Mèche à affleurer à spirale de compression, 1/2 po × 1 1/4 po

86H0615 - 1/4" Flush-Trim Compression Bit

Flush-Trim Compression BitsMade in U.S.A.

Quantity:

From: $87.50

Choose an option to view item availability.

Combining upcut flutes at the tip and down-cut flutes at the shank end, these bits leave a clean, chip-free edge on both faces of the workpiece. Because this flute pattern evacuates chips less aggressively than other flush-trim bits, it works best at a slower feed rate to prevent clogging and overheating.

The flutes cut with a continuous shearing action, which helps the guide bearings follow a template precisely by minimizing chatter. To retain their sharpness through extended use, the bits are made of solid carbide.

Available with a 1/4" or 1/2" cut diameter; each has a 1 1/4" cut height and is shanked to size.

Made in USA.

86H0615 - 1/4" Flush-Trim Compression Bit

Options:

Option

Variations:

  • 86H0615 1/4" Flush-Trim Compression Bit
    1 - $87.50
  • 86H0616 - Mèche à affleurer à spirale de compression, 1/2 po × 1 1/4 po
    1 - $159.00

Flush-Trim Compression Bits

Combining upcut flutes at the tip and down-cut flutes at the shank end, these bits leave a clean, chip-free edge on both faces of the workpiece. Because this flute pattern evacuates chips less aggressively than other flush-trim bits, it works best at a slower feed rate to prevent clogging and overheating.

The flutes cut with a continuous shearing action, which helps the guide bearings follow a template precisely by minimizing chatter. To retain their sharpness through extended use, the bits are made of solid carbide.

Available with a 1/4" or 1/2" cut diameter; each has a 1 1/4" cut height and is shanked to size.

Made in USA.