Although these bits can cut a wide variety of moldings, their primary advantage is the ability to solve little problems with just one bit. By adjusting the height of the bit to use a portion of the profile, you can add a multiplicity of details to a standard molding.
(Note: for additional clearance, the end bearing is removable.) For use with routers of 2 hp or more.
For better safety, these bits should be used only in a router table equipped with a fence and not used free hand.
Each bit includes an advanced polymer friction-fit holder that can be mounted horizontally or upright.
The 1 1/4” bit uses a 3/8” × 3/16” replacement bearing and the 2 1/4” bit uses a 1/2" × 3/16” replacement bearing (available separately).