Skip to contentAccessibility Statement
ITEM ADDED TO YOUR CART ()
logologoCart
Cart
Blade Pro epoxy is a two-part system with a mix ratio of 1:1
Mixing Blade Pro epoxy in a cup
Applying Blade Pro epoxy to a wooden knife handle scale
Inserting a knife tang into the mortise of a wooden handle that has been filled with epoxy
image
image
Blade Pro epoxy is a two-part system with a mix ratio of 1:1
Mixing Blade Pro epoxy in a cup
Applying Blade Pro epoxy to a wooden knife handle scale
Inserting a knife tang into the mortise of a wooden handle that has been filled with epoxy
image
image

Blade Pro Epoxy

Quantity:

Specially formulated for knife making, this epoxy excels at bonding dissimilar materials such as carbon or stainless steel (as well as ferrous and non-ferrous metals) to wood, bone, antler or composites.

The low-viscosity fluid spreads well, flowing easily into hidden-tang mortises to form a tight, waterproof seal. Suitable for both full- and hidden-tang knives.

Working time at 21°C (70°F) is 45 minutes. Do not use below 10°C (50°F). Cures fully in 72 hours. Machinable in 12 to 14 hours. A two-part system, 1:1 ratio.

The small kit includes 2 fl oz of epoxy and 2 fl oz of hardener, and the large kit includes 8 fl oz of epoxy and 8 fl oz of hardener. As with any two-part epoxy, coverage depends on how efficiently it is mixed and applied; for example, the small kit should be enough for at least three average-size kitchen knives, or as many as a dozen if carefully prepared to minimize waste. Shelf life is approximately 3 years if stored as directed.

Blade Pro epoxy is a two-part system with a mix ratio of 1:1

Options:

Size

Variations:


  • 1 - $21.50

  • 1 - $49.90

Blade Pro Epoxy

Specially formulated for knife making, this epoxy excels at bonding dissimilar materials such as carbon or stainless steel (as well as ferrous and non-ferrous metals) to wood, bone, antler or composites.

The low-viscosity fluid spreads well, flowing easily into hidden-tang mortises to form a tight, waterproof seal. Suitable for both full- and hidden-tang knives.

Working time at 21°C (70°F) is 45 minutes. Do not use below 10°C (50°F). Cures fully in 72 hours. Machinable in 12 to 14 hours. A two-part system, 1:1 ratio.

The small kit includes 2 fl oz of epoxy and 2 fl oz of hardener, and the large kit includes 8 fl oz of epoxy and 8 fl oz of hardener. As with any two-part epoxy, coverage depends on how efficiently it is mixed and applied; for example, the small kit should be enough for at least three average-size kitchen knives, or as many as a dozen if carefully prepared to minimize waste. Shelf life is approximately 3 years if stored as directed.

Related Products

56Z7200 - G2 Epoxy, 1.4l (48 fl oz)
56Z7201 - G2 Epoxy, 710ml (24 fl oz)
56Z7203 - G2 Epoxy, 355ml (12 fl oz)
G2 Epoxy
Product Information