Skip to contentAccessibility Statement
ITEM ADDED TO YOUR CART ()
logologoCart
Cart
08K4091 - Mirka Painter’s Tool Kit

08K4091 - Mirka Painter’s Tool Kit

Mirka Painter’s Tool Kit

Item 08K4091, Mirka Painter’s Tool Kit

Quantity:

$0.00
Online: Loading...
: Loading...

Manufacturer’s special offer until December 31, 2025.

This kit combines a range of premium-quality Mirka sanding equipment specifically chosen to help painters achieve the best results.

The Mirka painter’s tool kit includes the following:

  • DEROS 6" random orbit sander
  • DEOS 3" × 4" orbital sander
  • 1230 HEPA PC dust extractor
  • 5" platen for the 6" sander
  • Sleeve with 110V cable and hose

It also includes Mirka’s ultimate abrasives kit (a $543.60 value) at no additional cost.

  • Abranet assortments in 6", 5", and 3" × 4" sizes in a range of grits
  • Protector pads
  • Soft and medium groove interface pads
  • Systainer T-LOC case

The ergonomically designed Mirka DEROS electric sander lets you work quickly and efficiently with minimal dust. Its 6" diameter platen and aggressive 5mm random-orbital pattern permit rapid sanding of large surfaces while yielding consistent surface finishes. Its 350W brushless motor performs comparably to a 500W conventional motor, yet at only 4" tall and weighing 1kg (2 lb 3 oz), the sander is easy to handle.

The Mirka DEOS 3" × 4" electric sander is superb for finishing work. It has a tight 3mm orbital pattern that leaves smooth, even surfaces, combined with a compact 3" × 4" platen that permits precise sanding right up to an edge. At 4" tall and weighing just under 1kg (2 lb 3 oz), it has a well-balanced, ergonomic design that makes it highly maneuverable and comfortable to operate, while the platen’s bevelled sides help avoid contact with adjacent surfaces when working into tight spots.

Both sanders have low noise and vibration ratings and pair with the myMirka app to monitor long-term vibration exposure. Effectively dust-free in use, each has a pattern of holes in the platen that draws dust from across the entire sanding disc, and a rear port for connection to the included dust extractor.

Mirka’s 1230 HEPA PC 120V high-efficiency dust extractor delivers strong, consistent suction. Its powerful turbine creates a 250 mbar vacuum and 159 cfm of airflow, greatly reducing clean-up time while eliminating stray abrasive particles to yield better surface finishes and longer abrasive life. To help avoid health risks associated with airborne dust, its HEPA-certified filtration removes at least 99.97% of particles as small as 0.3 microns.

The kit comes with a 5" retrofit platen for the DEROS 6" sander. Used in place of its supplied platen, it has the identical weight and mounting system, letting you use 5" sanding discs without throwing off the sander’s balance. Like the supplied platen, it helps maintain even contact with the work and permits good airflow behind the disc.

An included extra-long cord/vacuum hose set gives you 6m (19'8") of range to move around without having to reposition the dust extractor. To protect surfaces from scratches while making the cord more manageable, the soft but durable sleeve is made of an anti-static material to resist picking up dust and debris.

The kit also includes 70 Abranet abrasive discs (five each of 80x, 120x, 180x, 240x, 320x, 400x and 600x in 5" and 6" diameters) and 30 Abranet 3" × 4" sheets (10 each of 80x, 120x and 220x), which use aluminum oxide grit bonded to a tough polyamide mesh, allowing sanding dust to be drawn through the entire disc or sheet to resist loading and maximize dust recovery.

Placed between the abrasive and the backing pad, the included interface pads yield more even results when sanding rounded or contoured surfaces. To prolong the life of the sander platen, the kit also comes with platen protectors that can be mounted between the abrasive and the pad to protect against wear.

Supplied with a Systainer case for organized storage and transport of the DEROS sander and discs.

Combined, these tools and components make a highly versatile and effective system for preparing surfaces for painting.

08K4091 - Mirka Painter’s Tool Kit

Options:

Variations:

  • 08K4091 - Mirka Painter’s Tool Kit
    1 - $0.00

Mirka Painter’s Tool Kit

Manufacturer’s special offer until December 31, 2025.

This kit combines a range of premium-quality Mirka sanding equipment specifically chosen to help painters achieve the best results.

The Mirka painter’s tool kit includes the following:

  • DEROS 6" random orbit sander
  • DEOS 3" × 4" orbital sander
  • 1230 HEPA PC dust extractor
  • 5" platen for the 6" sander
  • Sleeve with 110V cable and hose

It also includes Mirka’s ultimate abrasives kit (a $543.60 value) at no additional cost.

  • Abranet assortments in 6", 5", and 3" × 4" sizes in a range of grits
  • Protector pads
  • Soft and medium groove interface pads
  • Systainer T-LOC case

The ergonomically designed Mirka DEROS electric sander lets you work quickly and efficiently with minimal dust. Its 6" diameter platen and aggressive 5mm random-orbital pattern permit rapid sanding of large surfaces while yielding consistent surface finishes. Its 350W brushless motor performs comparably to a 500W conventional motor, yet at only 4" tall and weighing 1kg (2 lb 3 oz), the sander is easy to handle.

The Mirka DEOS 3" × 4" electric sander is superb for finishing work. It has a tight 3mm orbital pattern that leaves smooth, even surfaces, combined with a compact 3" × 4" platen that permits precise sanding right up to an edge. At 4" tall and weighing just under 1kg (2 lb 3 oz), it has a well-balanced, ergonomic design that makes it highly maneuverable and comfortable to operate, while the platen’s bevelled sides help avoid contact with adjacent surfaces when working into tight spots.

Both sanders have low noise and vibration ratings and pair with the myMirka app to monitor long-term vibration exposure. Effectively dust-free in use, each has a pattern of holes in the platen that draws dust from across the entire sanding disc, and a rear port for connection to the included dust extractor.

Mirka’s 1230 HEPA PC 120V high-efficiency dust extractor delivers strong, consistent suction. Its powerful turbine creates a 250 mbar vacuum and 159 cfm of airflow, greatly reducing clean-up time while eliminating stray abrasive particles to yield better surface finishes and longer abrasive life. To help avoid health risks associated with airborne dust, its HEPA-certified filtration removes at least 99.97% of particles as small as 0.3 microns.

The kit comes with a 5" retrofit platen for the DEROS 6" sander. Used in place of its supplied platen, it has the identical weight and mounting system, letting you use 5" sanding discs without throwing off the sander’s balance. Like the supplied platen, it helps maintain even contact with the work and permits good airflow behind the disc.

An included extra-long cord/vacuum hose set gives you 6m (19'8") of range to move around without having to reposition the dust extractor. To protect surfaces from scratches while making the cord more manageable, the soft but durable sleeve is made of an anti-static material to resist picking up dust and debris.

The kit also includes 70 Abranet abrasive discs (five each of 80x, 120x, 180x, 240x, 320x, 400x and 600x in 5" and 6" diameters) and 30 Abranet 3" × 4" sheets (10 each of 80x, 120x and 220x), which use aluminum oxide grit bonded to a tough polyamide mesh, allowing sanding dust to be drawn through the entire disc or sheet to resist loading and maximize dust recovery.

Placed between the abrasive and the backing pad, the included interface pads yield more even results when sanding rounded or contoured surfaces. To prolong the life of the sander platen, the kit also comes with platen protectors that can be mounted between the abrasive and the pad to protect against wear.

Supplied with a Systainer case for organized storage and transport of the DEROS sander and discs.

Combined, these tools and components make a highly versatile and effective system for preparing surfaces for painting.