Skip to contentAccessibility Statement
ITEM ADDED TO YOUR CART ()
logologoCart
Cart
16J0341 - 1/4" Bit Holder, ea.
16J0343 - 1/2" Bit Holder, ea.
16J0345 - 8mm Bit Holder, ea.
Brass Bit Holders mounted in a bench, holding various bits
16J0341 - 1/4" Bit Holder, ea.
16J0343 - 1/2" Bit Holder, ea.
16J0345 - 8mm Bit Holder, ea.
Brass Bit Holders mounted in a bench, holding various bits

Brass Bit HoldersMade in Canada

Quantity:

Developed to hold 1/4", 8mm or 1/2" round shank bits, these are the same brass cup inserts we use in our showrooms for bit display. They mount in a 5/8" diameter hole, and have grooved shanks to provide a good mechanical glue lock if permanent installation is desired. The center bore measures just over 5/8" deep.

One advantage of using these holders for bit storage, rather than simply boring suitably sized holes in a block of wood, is that they act as barriers against wood moisture migration, protecting bit shanks from corrosion.

Made in Canada.

16J0341 - 1/4" Bit Holder, ea.

Options:

Hole Diameter

Variations:

  • 16J0341 - 1/4" Bit Holder
    1 - $3.80
    5 - $3.40
  • 16J0345 - 8mm Bit Holder
    1 - $3.80
    5 - $3.40
  • 16J0343 - 1/2" Bit Holder
    1 - $4.20
    5 - $3.80

Brass Bit Holders

Developed to hold 1/4", 8mm or 1/2" round shank bits, these are the same brass cup inserts we use in our showrooms for bit display. They mount in a 5/8" diameter hole, and have grooved shanks to provide a good mechanical glue lock if permanent installation is desired. The center bore measures just over 5/8" deep.

One advantage of using these holders for bit storage, rather than simply boring suitably sized holes in a block of wood, is that they act as barriers against wood moisture migration, protecting bit shanks from corrosion.

Made in Canada.

Related Products

16J0361 - Bit Holders, 1/4" socket, pkg. of 6
16J0362 - Bit Holders, 1/2" socket, pkg. of 6
16J0365 - 8mm Bit Holders, pkg. of 6
Bit holder cut in half to show how the screw and bit fit into it
Bit Holders lined up to show the three sizes
Cutaway illustration of holder screwed to a wall
Four bit holders mounted to a wall, two of them holding router bits
Bit Holders
Product Information
16J0404 - 1/4" x 1" x 1/4" Straight Cutter Bit, Single Flute
16J0405 - 5/16" x 1" x 1/4" Straight Cutter Bit
16J0406 - 3/8" x 1" x 1/4" Straight Cutter Bit
16J0407 - 7/16" x 1" x 1/4" Straight Cutter Bit
16J0408 - 1/2" x 1" x 1/4" Straight Cutter Bit
16J0409 - 9/16" x 1" x 1/4" Straight Cutter Bit
16J0410 - 5/8" x 1" x 1/4" Straight Cutter Bit
16J0411 - 11/16" x 3/4" x 1/4" Straight Cutter Bit
16J0412 - 3/4" x 3/4" x 1/4" Straight Cutter Bit
16J0413 - 13/16" x 3/4" x 1/4" Straight Cutter Bit
16J0414 - 7/8" x 3/4" x 1/4" Straight Cutter Bit
16J0415 - 15/16" x 3/4" x 1/4" Straight Cutter Bit
16J0416 - 1" x 3/4" x 1/4" Straight Cutter Bit,
Diagram of bit labeled with measurements
Straight Cutter Bit next to a board with a groove cut into it
Straight Cutter Bit next to a board with a rabbet cut into it
Straight Cutter Bits
Straight Cutter Router Bits – Imperial, 1/4" Shank