05P3001 - Veritas Jointer Fence
Planing a square edge on a board requires a jointer fence, whether you are using an electric jointer or a hand plane.
The Veritas jointer fence allows you to shoot accurate and consistent square or bevelled edges with most iron or steel bench planes (excluding our Veritas bevel-up, smoother and custom bench planes). The integral rare-earth magnets make it quick and easy to attach or remove the 11" long anodized aluminum fence from either side of all sizes of bench planes, from a smooth plane (#4) to a jointer (#8).
As supplied, the 2" tall guiding face can be used to plane edges perfectly square to the face of your workpiece. It can also be used to shoot angles less than 90° when a bevelled wooden guide is attached to the inside face of the fence.
Patented. Made in Canada.
Integral rare-earth magnets embedded in the fence attach it to the side of compatible bench planes. The magnetic connection is strong enough to hold the fence stable during edge planing while still allowing quick removal when needed.
The fence is compatible with most iron or steel bench planes from a #4 smooth plane through a #8 jointer. It is not compatible with Veritas bevel-up, smoother and custom bench planes.
Yes – by attaching a bevelled wooden guide to the inside face of the fence, you can shoot edges at angles less than 90°. The as-supplied configuration planes edges square to the face.
Yes, a set screw on the fence can be adjusted to square the guiding face to the plane sole, compensating for minor variation in the plane's side geometry.
| Materials | Anodized aluminum; rare-earth magnets |
| Dimensions | 11" long fence; 2" tall guiding face |
| Country of Origin | Canada |
| Includes | Jointer fence |
| Package Quantity | 1 item |
| Certifications | Patented |
| Warranty | Lee Valley Satisfaction Guarantee |
Options:
Variations:
Veritas Jointer Fence
Planing a square edge on a board requires a jointer fence, whether you are using an electric jointer or a hand plane.
The Veritas jointer fence allows you to shoot accurate and consistent square or bevelled edges with most iron or steel bench planes (excluding our Veritas bevel-up, smoother and custom bench planes). The integral rare-earth magnets make it quick and easy to attach or remove the 11" long anodized aluminum fence from either side of all sizes of bench planes, from a smooth plane (#4) to a jointer (#8).
As supplied, the 2" tall guiding face can be used to plane edges perfectly square to the face of your workpiece. It can also be used to shoot angles less than 90° when a bevelled wooden guide is attached to the inside face of the fence.
Patented. Made in Canada.
