Q: Can this featherboard be used on either side of the saw blade?
Yes, the frame is designed for use to the left or right of the blade, so it works with an existing fence setup.
46J8342 - Dual Featherboard System
Option:
Choose an option to view item availability.
Though essential for safe ripping on table saws, featherboards can be a bother to set up and adjust.
These featherboards are quick to position and secure. Adjustment is controlled with two large T-knobs, one for fixing position relative to the blade, and the other for adjusting tension against the work. The 3/4" thick main frame has 5 1/2" of lateral travel and is suitable for use left or right of the blade.
The single featherboard comes with 5/8" and 3/4" table bars to fit most table slots, as well as bolts to fit 1/4" wide T-slot track fence systems.
The dual featherboard system includes a pair of independent featherboards (each with 5/8" and 3/4" table bars and bolts for 1/4" T-slot track), plus a 1 1/2" thick spacer with hardware that allows the featherboards to be stacked for tandem use with thicker stock or materials fed along their end or edge (such as with vertical panel raising or rabbeting).
Instructions included.
Yes, the frame is designed for use to the left or right of the blade, so it works with an existing fence setup.
Each featherboard comes with 5/8" and 3/4" table bars to fit most miter slots, plus bolts sized for 1/4" T-slot track fence systems.
The single featherboard handles typical ripping tasks, while the dual system adds a second independent featherboard and a 1 1/2" spacer so the pair can stack for tandem support on thicker stock or panel-raising cuts; choose the dual system for regularly working with thick or wide material.
These versatile featherboards travel 5 1/2" side to side on their 3/4" thick frame, giving enough range to reposition for different cuts without remounting.
Yes, instructions are included with each set to guide initial setup and adjustment.
| Dimensions | 3/4" thick main frame; 5 1/2" lateral travel; 1 1/2" thick stacking spacer (dual system) |
| Compatibility | Fits table saw miter slots via 5/8" or 3/4" bars; accepts 1/4" T-slot track fence systems |
| Includes | Featherboard; table bars (5/8" and 3/4"); mounting bolts; instructions; stacking spacer (dual system only) |
| Package Quantity | 1 item or 1 set |
| Warranty | Lee Valley Satisfaction Guarantee |
Options:
Option
Variations:
Versatile Featherboards
Though essential for safe ripping on table saws, featherboards can be a bother to set up and adjust.
These featherboards are quick to position and secure. Adjustment is controlled with two large T-knobs, one for fixing position relative to the blade, and the other for adjusting tension against the work. The 3/4" thick main frame has 5 1/2" of lateral travel and is suitable for use left or right of the blade.
The single featherboard comes with 5/8" and 3/4" table bars to fit most table slots, as well as bolts to fit 1/4" wide T-slot track fence systems.
The dual featherboard system includes a pair of independent featherboards (each with 5/8" and 3/4" table bars and bolts for 1/4" T-slot track), plus a 1 1/2" thick spacer with hardware that allows the featherboards to be stacked for tandem use with thicker stock or materials fed along their end or edge (such as with vertical panel raising or rabbeting).
Instructions included.
Choose an option to view item availability.
Choose an option to view item availability.
Choose an option to view item availability.
Choose an option to view item availability.
