00N1120 - 20mm Plain Nut, 1/4 20 Quick-Connect
Choose an option to view item availability.
With no shoulder, these nuts can be bottomed out in a hole, or set below a surface. The tapered interrupted thread design ensures positive locking and good pull-out resistance.
Can also be used for curved work, or when you want to set the nut deep to accommodate over-long bolts.
Insert nuts are die-cast from a zinc alloy, and require a 6mm hex key. As with any fastener, pre-drill size will vary from 8.7mm to 9.1mm, depending on the material thickness and density.
Measurements for 13mm Plain Insert Nuts
L: 13mm
L1: 3mm
d2: 12mm
d3: 7.5mm
Measurements for 20mm Plain Insert Nuts
L: 20mm
L1: 3.7mm
d2: 11.7mm
d3: 7.7mm
Options:
Length
Variations:
1/4-20 Quick-Connect Plain Insert Nuts
With no shoulder, these nuts can be bottomed out in a hole, or set below a surface. The tapered interrupted thread design ensures positive locking and good pull-out resistance.
Can also be used for curved work, or when you want to set the nut deep to accommodate over-long bolts.
Insert nuts are die-cast from a zinc alloy, and require a 6mm hex key. As with any fastener, pre-drill size will vary from 8.7mm to 9.1mm, depending on the material thickness and density.
