00N1201 - Capped Insert Nut, 1/4-20 Quick-Connect
Used for through joints where the nut may be exposed, this nut has a closed end and is knocked into the pre-drilled hole.
The teeth hold the nut in place and prevent it from turning as the bolt is tightened.
The nut is die-cast from a zinc alloy. Pre-drill size will vary from 8.3mm to 8.7mm, depending on material thickness and density.
Measurements for Capped Insert Nut
L: 15.5mm
L1: 13mm
D1: 17mm
D2: 10.8mm
D3: 8.4mm
Options:
Variations:
1/4-20 Quick-Connect Capped Insert Nut
Used for through joints where the nut may be exposed, this nut has a closed end and is knocked into the pre-drilled hole.
The teeth hold the nut in place and prevent it from turning as the bolt is tightened.
The nut is die-cast from a zinc alloy. Pre-drill size will vary from 8.3mm to 8.7mm, depending on material thickness and density.
Choose an option to view item availability.
Choose an option to view item availability.
Choose an option to view item availability.
Choose an option to view item availability.
