86N5441 – Gen 2 Parallel Guide System
Offering a straightforward yet highly precise approach to making square cuts with a track saw, this system ensures accurate, repeatable results with minimal set-up time.
Using a pair of sturdy sliding flip stops to provide two points of contact against the material for reliable registration, it references from the panel edge to place a parallel cut at a consistent offset. To set and lock the stop position relative to your guide rail’s splinter guard for an exact cut every time, each stop has a calibration rod designed to minimize risk of parallax error.
The stops travel in two machined aluminum T-tracks that mount firmly to your track saw’s guide rail at 90°, using universal connectors that permit fast, secure attachment without tools. The tracks can also be attached to the side of a GRS-16 or GRS-16 PE guide rail square (available separately), which connect to Festool track-saw guide rails, as well as those made by Triton, Makita and Powertec. The GRS-16 PE also fits Milwaukee track-saw guides.
Each stop references against laser-engraved metric and Imperial scales on the T-track. The stops slide with slight resistance in the track, allowing incremental adjustments while preventing them from shifting as you lock them in place.
The set comes with two 30" and two 50" tracks; an optional pair of 20" tracks is available separately. This lets you choose longer tracks for cutting large workpieces, or more compact, maneuverable ones whenever a wider cut isn’t required. You can switch your flip stops from one set of rails to another without having to readjust the calibration rods. The set also includes two extra-long calibration rods for use when cutting pieces narrower than the width of your guide rail. They can be quickly installed in place of the regular rods, which hold their original settings so they can be reinstalled without need for recalibration.
Made in USA.
Not available for shipment to Québec.
Options:
Variations:
TPG Gen 2 Parallel Guide System
Offering a straightforward yet highly precise approach to making square cuts with a track saw, this system ensures accurate, repeatable results with minimal set-up time.
Using a pair of sturdy sliding flip stops to provide two points of contact against the material for reliable registration, it references from the panel edge to place a parallel cut at a consistent offset. To set and lock the stop position relative to your guide rail’s splinter guard for an exact cut every time, each stop has a calibration rod designed to minimize risk of parallax error.
The stops travel in two machined aluminum T-tracks that mount firmly to your track saw’s guide rail at 90°, using universal connectors that permit fast, secure attachment without tools. The tracks can also be attached to the side of a GRS-16 or GRS-16 PE guide rail square (available separately), which connect to Festool track-saw guide rails, as well as those made by Triton, Makita and Powertec. The GRS-16 PE also fits Milwaukee track-saw guides.
Each stop references against laser-engraved metric and Imperial scales on the T-track. The stops slide with slight resistance in the track, allowing incremental adjustments while preventing them from shifting as you lock them in place.
The set comes with two 30" and two 50" tracks; an optional pair of 20" tracks is available separately. This lets you choose longer tracks for cutting large workpieces, or more compact, maneuverable ones whenever a wider cut isn’t required. You can switch your flip stops from one set of rails to another without having to readjust the calibration rods. The set also includes two extra-long calibration rods for use when cutting pieces narrower than the width of your guide rail. They can be quickly installed in place of the regular rods, which hold their original settings so they can be reinstalled without need for recalibration.
Made in USA.
Not available for shipment to Québec.
